DBX 2231 20 SERIES Graphic Equalizer/Limiter with Type III Noise Reduction * WINLAND *

100% Actually PICNOTE:Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefullyDue to the different display and differentlight, the picture may not reflect the actual color of the item. Thanks for understandingPlease read the measurement before buying.DBX 2231 Graphic Equalizer/Limiter with Type IIOEM ONLYFeaturesRevolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dBPatent-pending PeakPlus™ Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signalFour segment LED bargraph for BOTH Gain Reduction AND Output LevelStatus LEDs offer visual feedback for all settings on the front panelSpecificationsInput Connectors:1/4" TRS, female XLR (pin 2 hot), and barrier terminal stripInput Type: Electronically balanced/unbalanced, RF filteredInput Impedance Balanced 40 kOhm, unbalanced 20 kOhmMax Input: >+21dBu balanced or unbalancedCMRR: >40dB, typically >55dB at 1kHzOutput Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal stripOutput Type: Impedance-balanced/unbalanced, RF filteredOutput Impedance: Balanced 200 ohm, unbalanced 100 ohmMax Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)Bandwidth: 20Hz to 20kHz, +/-0.5dBFrequency Response 50kHz, +0.5/-3dBSignal-to-Noise (NR In: +/-6 and +/-15dB ranges) >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidthDynamic Range (NR In: +/-6dB and +/-15dB ranges) >120dB, unweightedSignal-to-Noise (NR Out: +/-6dB range) >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidthDynamic Range (NR Out: +/-6dB range) >112dB, unweightedSignal-to-Noise (NR Out: +/-15dB range) >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidthDynamic Range (NR Out: +/-15dB range) >108dB, unweightedTHD+Noise Interchannel Crosstalk Noise Reduction: Up to 20dB of dynamic broadband noise reductionNR Switch: Activates dbx Type III Noise ReductionBypass Switch: Bypasses the graphic equalizer section in the signal pathLow cut Switch: (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filterRange Switch: (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut rangeI/O Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBuGain Reduction Meter 4-LED bar graph (all Red) at 0, 3, 6, and 10dBIndicators: NR Active (Yellow); EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)Operating Voltage: 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60HzPower Consumption: 28WPower Connector: IEC receptacleDimensions: 5.25" H X 19" W X 7.9" D (13.335cm x 48.3cm x 20.1cm)6 Months service warranty