begrint | 3D Printer Spring Steel Build Plate 335x325mm PEI PEO PET Sheet Smooth or Textured for Bambu Lab H2C A2L Heated Bed

For Bambu Lab H2C A2L Build Plate 335x325mm Textured/Smooth PEI PEO PET Plate Spring Steel Sheet Heat Bed 3D Printer PartsSpecificationSize:335x325mmSuitable for Bambu Lab H2C /A2LAfter our extensive testing, we recommend:PEO/PET to print PLA , PETG;PEY to print PLA, PETG, TPU, ABS.PEI to print PLA /PETG/PC/ABS /TPU /Nylon etc.PEF-Flake/Star to print PLA/PETG/TPU/ABSMaximum temperature resistance：PEY-smooth: max 180℃PEF-flake/star: max 180℃PET/PEO: max 120℃Gold texture PEI: max 300℃Cold Print Material Compatibility:Compatible only with PLA and PETG, offering extremely goodThe corresponding temperature PLA: 30-35℃; PETG: 55-65℃Advantage1. Double-sided printing, It is convenient, durable and practical.2. Suits variety of filaments, especially for PLA.3. Easy to get the first layer even for a new user.4. Easy to clean, just wipe it off with a wet tissue or alcohol before printing.5. Spring steel sheet is made of stainless steel, no matter how bent it is, it can return to flat state.6.You only need to bend the spring steel sheet with your hands, and the model can be easily demoulded without using other tools.Notice1.There is a protective film on the smooth surface, please tear off the film before using.2.Please cool the steel plate before removing the 3D printing model.Detailed Pictures:Q1: Which 3D printers is this build plate compatible with?A: It only fits Bambu Lab H2C and A2L 3D printers. Size 335×325 mm, exactly matches the original hot‑bed dimension. Just attach it directly to the magnetic base.Q2: What filaments can each surface handle and what is the max temperature?A: ‑ Gold textured PEI surface: max 300℃, works with PLA, PETG, ABS, TPU, PC, Nylon and most common filaments. ‑ PEO / PET surface: max 120℃, recommended for PLA and PETG. ‑ Smooth PEY surface: max 180℃, for PLA, PETG, TPU, ABS. ‑ PEF‑Flake / Star surface: max 180℃, for PLA, PETG, TPU, ABS. Cold‑print mode is only available for PLA and PETG.Q3: What should I do before first use?A: There is a protective film on the smooth side. Please peel it off before printing. Mount the plate on the magnetic base and run bed leveling. Wipe the surface with alcohol or wet tissue for better first‑layer adhesion.Q4: How to remove printed models? Do I need extra tools?A: No extra tools required. Wait until the spring‑steel plate cools down completely. Bend the plate gently by hand, the printed part will pop off easily. The steel sheet will spring back flat automatically. Do not remove parts while the plate is still hot.Q5: Why does my model warp or fail to stick to the plate?A:Keep the surface clean; wipe off fingerprints and grease with alcohol.Dry your filament properly, moist filament causes warping.Use the recommended bed temperature: 30‑35℃ for PLA, 55‑65℃ for PETG.Complete bed leveling to get correct nozzle‑to‑plate distance.Q6: Is this a double‑sided plate? How to maintain and extend service life?A: Yes, both sides are usable with different coating surfaces. Clean with alcohol wipes after printing. Avoid sharp objects scratching the coating. Do not sand the surface. You can keep using it as long as the coating stays intact.