QXNY Front/Side/Left/Right HD Reverse Backup Camera with Reversing Assist System Rear View Cam Parking Safety Night vision

urchase Notice► Video Signal Compatibility:The video signal must be compatible with your device. Common signals are AHD or CVBS (most in-car displays allow switching between CVBS and AHD modes).►Connector Compatibility:Ensure the connector type matches your device (e.g., 4-PIN or RCA).►This product outputs a CVBS signal.supports RCA connectors ►Signal Switching Guide:For displays requiring  signal: Factory Settings > Reversing (Image) Settings > Select signalPacking list: 1 * Rear View Camera 1 * Power Cord 1 * Video CableWhen the vehicle is driving in tight places, you cannot observe small obstacles around the vehicle. In fact, it is very dangerous.In order to solve the above problems, we can install a high-definition camera on the side of the car. At this time, the surrounding obstacles are visible and safe!This camera, according to the image , is divided into two types:1: Car rear camera. It is usually installed on the side of the car or on the rear bumper of the car to see the rear wheel position of the car or obstacles behind the car.2: Car front camera. Generally installed on the side of the car, check the obstacles around the front wheels of the car.In order to achieve different functions, the power supply method of the camera will also be different, please supply power according to your needs.Power supply mode 1: ACC+, start the car, start the cameraPower supply mode 2: The steering device takes power, when you swing the steering switch, the camera is activated.Power supply mode 3: reversing light + take power, start the camera when reversing. Specification:Condition: 100% Brand NewMaterials: plastics, electronic components,Colour: BlackImage sensor: 1/3 color CMOSSystem: NTSC or PAL, Default: NTSCPixel: 628582/510492TV Line: 420/380Angle: 140Working voltage: DC12VHorizontal resolution: 420 TV linesVideo output: 1.0 VP-P, 75 OHM Gamma factor: 0.45White Balance: Auto, Scanning System: 2:1 InterlaceWaterproof grade: IP67/68Minimum illumination: 0.1 Lux/F=1.2 (0 Lux, IR on)Working temperature: -20℃-75℃, the maximum relative humidity is 95%Storage temperature: -40℃-85℃, maximum relative humidity 95%