Super EL50448 Car Tire Pressure Monitoring Relearning Tool TPMS Activation Tool for Ford Special GMC Chevrolet and Opel Vehicles

Super EL50448 is able to work with both G.M series and F.ord series TPMS relearn tool, Super EL50448 is essential tool of replacement tire pressure sensor, tire pressure alarm remove or exchange tires for G.M / C.hevy / Bu.ick / G.MC / F.ord / L.incoln / M.ercury etc.For Ford:For G.M :【How to switch between G.M and F.ord brand?Hold the power button for 3 seconds and 2 LEDs flashing 2 times, selected brand’s LED flashing 2 times.【How to detetied which mode the device in?Press the power button, if the Green LED flashing, means Super EL50448 in G.M mode, if the Yellow LED flashing, means Super EL50448 in F.ord mode.How to use Super EL50448?Before do TPMS reset, please make sure the car already coding and enable the TPMS function, this is very important. You can use Forscan software with ELM327 to enable the function or use VCMII hardware to enable as well.1. Need 1x Pc 9V battery to work (Not included in this parcel)2. Set the car in TPMS learning mode. (car horns twice)3. Starting from the left front tire, the antenna of the dedicated tool for tire pressure monitoring is facing upwards against the tire sidewall near the rim of the valve stem to start the antenna. Press and release the button and wait for the speaker to emit a chirp. Once the speaker is chirping, the sensor information is read and the turn signal to be read at the next position will light.4. Follow this order to rest TPMS one by one: Front left, front right, rear right, rear left.5. After all sensors reseted, the car horns twice, the TPMS re-learn finished.【How to set my car in TPMS re-learn mode?For G.M series cars:1. Make the gear in P position.2. Use cruise to choose TPMS re-learn mode in the dashboard settings.3. Horn will ring twice and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tireFor F.ord series cars:1. Make the gear in P position.2. With the ignition switch to OFF, press and release the brake pedal3. Turn the ignition switch from the OFF position to the RUN position 3 times and end at RUN position4. Depress and release the brake pedal5. Ignition to OFF position6. Ignition goes from the OFF position to the RUN position 3 times and ends at RUN position7. Horn will ring once and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tirePacking List:1pc * Super EL50448