257x257mm Textured Double‑Sided PEI Magnetic Spring Steel Cold Build Plate 3D Printer Parts for Bambu Lab X1 X1C P1S P1P A1

1PCS Build Plate 257x257 for Bambu Lab A1 P1P P1S Smooth X1C Spring Steel Sheet Double Sided 3D Print For Bamboo X1 Carbon Plate BedFeatures:1. Double-sided printing, It is convenient, durable and practical.2. Suits variety of filaments, especially for PLA.3. Easy to get the first layer even for a new user.4. Easy to clean, just wipe it off with a wet tissue or alcohol before printing.5.Spring steel sheetis made of stainless steel, no matter how bent it is, it can return to flat state.6.You only need to bend the PET-PEI with your hands, and the model can be easily demoulded without using other tools.7.Easy to Install:The PEI-PET spring steel sheet is flat and flexible, it comes without magnetic base sheet, but could be magnetically attracted to the hotbed, because lab X1 3D printer heated bed is magnetic, just put and print.Specification:Size: 257x257mmSuitable for Bambu Lab X1, X1-Carbon, P1P, P1S, P2S, X1E, A1,X2DApplicable consumables:PEO/PET to print PLA , PETG;PEY to print PLA, PETG, TPU, ABS;Black smooth PEI to print PLA, PETG, TPU.PEI to print PLA /PETG/PC/ABS/TPU /Nylon etc.The corresponding temperature PLA: 60-65℃; TPU: 30-40℃; PETG: 70-80℃, ABS: 80-100℃Use Tips:① There is a protective film on the surface, please remove it before use.② Before printing, make sure the build plate is clean, no fingerprints or dust. If you touch the plate surface and leave fingerprints, then you will find some pattern disappear, don't worry, please wipe with a wet tissue, and then dry the surface with a dry tissue, the pattern will reappear.③ Please cool the PEI steel plate before removing the 3D printing model.④ After our extensive testing, we recommend PET to print PLA and TPU and PETG.PEI print PLA /PETG/PC/ABS /TPU /Nylon etc.⑤This product does not come with magnetic stickersDetailed Pictures: