FMS Model Aircraft FPV Syncpilot Headtracker Set Dual-Axis Servo Gimbal Image Transmission Base Head Tracking System

DescriptionMeet SyncPilot – the slick head tracking system built by FMS and XF Robot for mid-to-close-range FPV action. It runs on its own dedicated 2.4G connection (no messy signal forwarding required), so you get plug-and-play simplicity for your FPV gear.The system delivers universal compatibility with virtually all RC platforms - from multirotors and fixed-wing aircraft to surface vehicles. Under optimal conditions, it can achieve 1km ground operational range and 4km airborne range, making it the ideal solution for most mid-to-close-range FPV scenarios. Install the SyncPilot on your model and dive into head-tracking technology!What's in the box:1 x Headtracking Module1 x Headtracking Transmitter1 x SyncPilot Headtracking Receiver1 x 5V Power Cable1 x 3M Dual Lock™1 x Product ManualQ&A:1. What is a Headtracker?A Headtracker is a motion-based control system that translates head movements into real-time control signals. When mounted on FPV goggles, it wirelessly transmits these signals to the gimbal, which adjusts the camera's orientation, delivering a seamless and immersive FPV experience with responsive, real-time control.2. What other equipment is needed to use the SyncPilot Headtracker Set?You’ll need a gimbal, camera, video transmission system, and compatible FPV goggles for mounting the SyncPilot Headtracker Set.3. Are there any other accessories available to complement the SyncPilot Headtracker?Yes! We offer several accessories to enhance your FPV experience, including the VTX Mount & Cooling Fan, FPV Servo Gimbal, and FPV Cockpits for the FMS RC Airplanes, including the 1100mm PC-21 and 80mm BAE Hawk.4. What if the gimbal moves in the opposite direction of my head?Make sure the head tracking module is installed correctly. You can also use the head tracker software to adjust the direction and gain settings to match your preferred setup.5. How is the head tracking module powered?The head tracking module runs on an independent battery that is charged via a Type-C port for up to 1 hour and 15 minutes of use.6. How is the head tracking receiver powered?The head tracking receiver requires 5V power, which can be supplied through a direct connection to UBEC, the RC receiver, or the flight controller for quick and easy setup.Specification:Headtracker Module Size 4528.24.2mmReceiver Size382215mmTransmitter Size402111.5mmGross Weight80gPackage Size1359055mmAssembly Time5minHeadtracker Module Battery3.7V 300mAhOperating Time on Full Charge1.25hOperating Frequency2.4GhzSingal Range (Optimal Condition)Surface 1km; Airborne 4kmAntennaIPEX Omnidirectional T-type Antenna | Max. Gain 3dBiCasing MaterialABS Plastic