juan juan | HW-100 5 In 1 Metal Detector LCD Display Wood Stud Finder AC Wire Metal Pipe Wooden Scanner Depth Detection for Safer Drilling

HW-100 5 In 1 Metal Detector LCD Display Wood Stud Finder AC Wire Metal Pipe Wooden Scanner Depth Detection for Safer DrillingThe HW-100 Wall Detector uses advanced electromagnetic sensing technology to accurately locate hidden objects behind walls, ceilings, and floors before you drill, cut, or fasten. Whether you are hanging a picture, installing shelves, running cables, or doing a full home renovation, this compact tool helps you avoid costly and dangerous mistakes.Features▶ Multiple Detection Modes·1/2"Stud Scan Mode:Detects wood or metal studs up to 13mm deep;·1"Stud Scan Mode:Detects wood or metal studs up to 25mm deep;·1 1/2"Stud Scan Mode:Detects wood or metal studs up to 38mm deep;·Metal Mode:Detects metal up to 80mm for magnetic(60mm for non- magnetic)deep;·AC Mode:Detects live unshielded AC wires up to 51mm deep;▶ Accurate & Easy to ReadThe large LCD display with backlight shows signal bars, mode indicators, and battery status in real time. Audible beep alerts increase in frequency as you approach the target center, making positioning fast and intuitive.▶ Safety FirstAC live wire detection gives you peace of mind when working near electrical installations. The detector automatically warns you when energized cables are nearby, even in metal detection mode.▶ Wide application rangeThe stud locator can quickly locate metals and wooden AC wires hidden in walls, floors and ceilings of your home, helping you avoid dangers when installing televisions, cabinets, garage shelves, etc.Specifications•Name:Wall Metal Detector• Model: HW-100• Detection Types: Metal, Wood Stud, AC Live Wire• Max Detection Depth:- Magnetic metal : up to 80mm- Non-magnetic metals(copper): up to 60mm- Wood Stud: up to 38mm- AC Live Wire: up to 51mm• Display: LCD with backlight• Power: 9V Battery (6F22, NOT included)• Material: ABS PlasticHow to Use ？1. Insert a 9V battery into the compartment.2. Press the power button and select your desired detection mode.3. Calibrate the detector on a clean wall section (away from any metal).4. Slowly move the detector horizontally across the wall.5. Watch the LCD signal bars and listen for the beep — the strongest signal indicates the target center.6. Mark the location and proceed with your work safely.Package Contents1 x HW-100 Wall Metal Detector1 x User Manual (English)