6000W Solar Inverter Generation 110V/220V 1200W Solar Panel Automotive Battery Charge Controller Solar Complete Power Solar Kit

modname=ckeditor6000W Solar Inverter Generation 110V/220V Solar Panel 12V Automotive Battery Charge Controller Solar Complete Power Solar Kit Solar system combination1. Introduction to solar energy systems:solar panel (to receive solar energy to charge the battery)+Inverter (to convert 12V DC power of the battery into 220V or 110V AC power)+solar controller (to control battery charging and discharging)+battery (energy storage) (provided by the customer)2.ommodity informationsolar panel Product parametersPower under normal conditions: 20W-80WOpen circuit voltage (voc): 20VMaximum power voltage (vmpp): 18vShort circuit current (isc): 1.2AMaximum power current (impp): 0.9AOutput: USB DCSize：42cm X 28cm Standard test conditionsAM=1.5Irradiance=1200W/㎡Temperature=25 ℃inverterStarting peak power: 1200WContinuous power: 250WDigital display: input/output voltageInput voltage: 12VDCOutput voltage: 220VAC/110VACDual USB interface: 5VDC/2.1ANo-load current: ≤ 0.5AConversion efficiency: greater than 90%Protection function: overload, over temperature, high voltage, low voltage, reverse connection, short circuit intelligent temperature control, can be used for electrical appliances less than 300W (excluding inductive load electrical appliances and motor products)3. Package:Independent packaging:solar panel+ inverter+30A controllerPackaging and accessories:1 inverter+1 pair of red and black battery clips+1 cigarette lighter+English inverter manual+1 solar controller+English controller manual+solar panel+DC cable+DC crocodile clipPackage size: 45X34X14CMKind reminder:1. Please try to use our standard battery cable as much as possible, otherwise it cannot output full power!2. Start the inverter; Start the machine first and then turn on the load. Shutdown: First disconnect the load and then shut down.3. It is strictly prohibited to connect the mains power to the output port, and it is strictly prohibited to reverse connect the battery with the load.4. Do not overload household appliances such as inverters, motors, water pumps, air conditioners, and other inductive loads. Please multiply the rated power by at least three times, and the resulting value should not exceed the inverter power5. The inverter red light is on and there is a buzzing sound. Please check if it is overloaded and if the battery is fully charged (regardless of whether your battery is a new one). Please charge the battery for at least 3 hours and try again6. When not using the inverter, please turn off the inverter switchWhen the inverter beeps, be sure to first disconnect the load, turn off the inverter switch, and then check the problemNote:1. Due to slight color changes caused by manual measurement and different display settings, please allow for a difference of 1-3 centimeters (0.4-1.18 inches).2. Due to differences in lighting and screen, the color of the item may differ slightly from the image. Please understand.