begrint | 264x276mm Cold Spring Steel Build Plate For Anycubic Kobra X Kobra S1 S1C Kobra 4 3D Printer Cool Heat Bed Sheet Parts

For Anycubic Kobra X Cold Plate 264x276mm Kobra S1 S1C Build Plate For Anycubic Kobra S1 Combo Heat Bed Cool Spring SteelSpecification：Size:264x276mmCompatible with:For Anycubic Kobra x / Kobra s1/ kobra s1 combo/s1c/Kobra 4Double sided:both side can be printing.Detailed Pictures:Q1. Which 3D printers is this build plate compatible with?A: This cold plate measures 264×276mm and is designed specifically for the Anycubic Kobra X, Kobra S1, Kobra S1 Combo, Kobra S1C and Kobra 4. Please confirm your machine's heated bed size before ordering.Q2. Is this plate double-sided? How thick is it?A: Yes, it's fully double-sided — both sides are coated with a high-performance adhesive coating. The plate is ~0.7–0.8mm thick with a reinforced, stronger magnetic design. It uses a sandwich structure with a high-elasticity spring steel core in the middle.Q3. Do I really not need to wait for the model to cool down before removing it?A: Correct. The key advantage of a cold plate is eliminating the long cooling wait. After printing, simply flex the steel plate and the model releases quickly — boosting continuous printing efficiency without waiting for the bed to cool.Q4. Do I need glue or painter's tape for adhesion? Which filaments work?A: No glue needed. The special high-molecular coating keeps the model's base flat and effectively resists warping. Recommended temperatures: PLA 40–50℃, PETG 60–70℃.Q5. How do I remove the print? Will it scratch the plate?A: Flex the spring steel plate to pop the model off in about 1 second — no scraper required. Release relies on the plate's flexing, so normal operation won't scratch the coating or steel. Avoid prying with a metal scraper.Q6. What does the bottom surface of the print look like vs. a regular matte PEI plate?A: The print bottom has a fine-textured surface, a feel between matte and glossy — smoother than the bottom from a regular matte PEI plate.