MXR Silicone Wiper Blade Ceramic Coated Water Repellent Quiet Streak-Free Car Wiper Blade[Fast Shipping]

Welcome To Our Store. MXR SILICONE WIPER NOT YOUR ORDINARY WIPER. ⭐ WHY CHOOSE MXR SILICONE WIPER? Even-Pressure Wiping Performance Extreme Heat & Cold Resistance Aerodynamic Precision Design Superior Water Repellency Clear Vision in Heavy Rain Built-in Ceramic Coating Every Swipe Creates a Water-Repellent Layer Durable & Long-Lasting Performance ️ INSTALLATION METHOD 1. Clean the windshield thoroughly with a glass cleaner to remove oil film and residue. 2. Ensure the windshield is completely clean and dry. 3. Install the silicone wiper blade and run the wipers at medium speed for 3–5 minutes on a dry windshield to activate the ceramic coating. 4. Spray water onto the windshield. If water beads and rolls off naturally, the coating has been successfully formed. ️ PROFESSIONAL USE GUIDELINES • Verify the correct wiper size, model, and accessories before installation. • Turn off the engine before replacing the wiper blade. • Replace the blade only when the wiper arm is in the upright position. • Ensure the wiper blade and arm are securely installed before use. • The silicone refill has an adhesive coating that may stick to your hands during installation. • Water-repellent performance may vary depending on temperature and vehicle model. In colder conditions, allow additional dry-wiping time. • Keep the windshield free from dirt, sand, and debris to prevent premature wear. • If noise, skipping, or friction occurs, clean the windshield with glass cleaner and perform dry wiping to restore the ceramic coating. Welcome To Our Store.