Car Battery Remote Control Switch To Prevent Power Loss and Leakage Smart Breaker 160 Feet Distance Battery Cut-Off Switch

12V/24V car battery main switch with remote battery disconnect switch LED voltage display suitable for cars, trucks, boats and RVsProduct specifications and features:1. Working voltage range: 6-30VDC2. Adaptive 12V vehicle system and 24V vehicle system3. Automatic alarm for power loss threshold and automatic battery disconnection4. Frequency 433.92MHz, matching self-locking mode5. Indicator light display (on when on, off on off)6. 700uA ultra-low standby power consumption7. Driving process and ignition mis-trigger protectionProduct parameters1. Working temperature -20 degrees--+100 degrees2. Switch rated current 250A3. Switching instantaneous current 500A4. Loss of power protection threshold: 11.8V+-0.2V/23V+-0.2V5. Delay alarm for 60 seconds when power is lost and automatically disconnect after 120 seconds.6. Standby current 700uARemarks:1. The remote control can be paired with the device normally within the working voltage range.2. The manual ON/OFF button can turn on and off the equipment within the working voltage range.3. The device automatically shuts down and disconnects when the power supply voltage is lower than 6V or higher than 30V.4. If the power supply voltage is lower than the protection threshold voltage (11.8V/23.2V), an alarm will appear for 60 seconds, and the device will automatically disconnect for 120 seconds to protect the battery.5. If the voltage is higher than 13.3V (12V system)/26.2V (24V system), the radio frequency remote control will fail to prevent accidental touching of the remote control buttons during driving, causing power outage while driving.6. When the voltage range is 6-18V, it will automatically identify as a 12V vehicle system and work in response to the 12V system threshold point.7. When the voltage range is 18-30V, it will automatically identify as a 24V vehicle system and work in response to the 24V system threshold point.8. When driving, the battery voltage is relatively high and the system enters the driving false trigger protection state.9. The battery voltage is relatively low during ignition and the system enters the ignition mistrigger protection state.Remote control matching instructions:1. Interlocking mode (applicable to vehicle system control) - Press the manual button ON continuously for 3 seconds and the code matching indicator light flashes three times to enter the learning state. Press the button on the remote control. After the code is successfully combined, the code indicator light flashes three times. Press another button on the remote control and the code indicator light flashes three times after the code is successfully combined.2. After entering the learning state, if the learning code indicator does not receive the remote control signal within 30 seconds, it will automatically exit the learning state;3. Clear the code - long press the manual button ON and the code indicator light flashes 8 times to indicate that the code clearing is completed (long press the manual button ON and the indicator light flashes 3 times, 4 times, 5 times, and 8 times in sequence; 3 flashes are the interlock mode learning state, 4 flashes are the self-locking mode learning state, 5 flashes are the inching mode learning state, and 8 flashes are the code clearing state);4. A set of 20 codes for a device can be paired with 10 different remote controls at the same time.