4 In 1 Multi Frequency Remote Duplicator 287-868MHz Rolling Fixed Code Garage Door Gate Wireless Clone Key Fob

Product Specs1 , Name：Universal Remote Control2 , Material：ABS3 , Buttons : 4 Buttons4 , Battery：CR2032（Include Battery)5 , Distance：30-150m (Open area)6 , Corresponding frequency: 250-915MHz7 , Learning frequency range: 287MHz,300MHz ,306MHz ,310MHz ,315MHz, 315.5MHz ,330MHz, 360MHz ,390MHz, 410MHz, 430.5MHz, 433.42MHz, 433.92MHz, 868.35MHz, 286-361MHz, 384-400MHz.8 , Scope of use：Uses: garage doors, Gate Doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products, Alarm Systems etc9 , If your remote control is a fixed code, after cloning, the new remote control will work.10 , If your remote control is rolling code, after cloning, the new remote control needs to be programmed / activated on the receiver, the new remote control worksHow to Copy a Remote Control After Receiving It?01 Clear Existing Codes FirstSimultaneously press the two buttons in the first row (as shown in the diagram) until the indicator light flashes three times. Then release either button and press the other button three times (while still holding the first one). The indicator will start flashing rapidly, indicating the codes have been cleared successfully. (After clearing, a short press on any button will not light up the indicator.)02 Copy and PairHold the original remote control in one hand and the copy remote in the other, placing them close together. Press the corresponding button you wish to copy on both remotes simultaneously. The LED indicator will flash slowly twice, then rapidly three times, and finally stay lit continuously, indicating successful copying. Repeat this process for all other buttons as needed.How to Restore After Accidental Code Clearance?If you accidentally clear the codes, you can restore the previously saved remote control codes by simultaneously pressing the two buttons in the second row of the copy remote until the indicator flashes rapidly.(Note: This method only works if you have cleared the codes by mistake and have not yet performed any new copying operations.)