Fluke | Fluke 376 FC 1000A AC/DC True-RMS Clamp Meter With Insulated Hand Tool Starter Kit Measures AC/DC Current With Included IFlex

Fluke 376 FC 1000A AC/DC True-RMS Clamp Meter With Insulated Hand ToolStarter Kit Measures AC/DC Current With Included IFlexTrue-rms AC/DC ClampMeter with iFlex !!Package Includes:Fluke 376 FC True-RMS Clamp Meter18-inch iFlex® Flexible Current ProbeTPAK magnetic hanging strapTL75 Test LeadsSoft carrying caseFluke 376 FC Special Features:1. Connect your meter to your smartphone with fluke connect measurements2. Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks3. Record results directly to your phone and the cloud4. Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 376 FC5. Create and share reports from the field via email, or converse in real time with ShareLive video callsMain Features：Use Fluke Connect Measurements to connect the meter to your smartphoneRead the measured value through the mobile phone at a safe distance, the meter assumes all risks, and the staff only needs to wear less personal protective equipmentRecord measurement results directly to mobile phone and CloudUse the logging function of Fluke 376 FC to perform other tasks while collecting intermittent faultsCreate reports on site and share them instantly via email, or use ShareLive™ video calls for real-time conversationsThe iFlex flexible current probe expands the measurement range of AC current to 2500 A; it can be measured in a small space with a large-size conductor (included)TPAK magnetic lanyard (included)The integrated VFD low-pass filter can be used to accurately measure the drive motorUsing proprietary surge measurement technology, it can filter out noise and accurately capture motor starting current through current protection monitoringCAT IV 600 V, CAT III 1000 V safety levelcome with Soft carrying caseMeasurement Capability:1000 A AC and DC current measurement2500 A AC current measurement (using iFlex flexible current probe)1000 V AC and DC voltage measurementCan accurately measure the true RMS voltage and current of nonlinear signalsUse the main clamp and iFlex to perform frequency measurements up to 500 HzResistance measurement can reach 60 kΩ, and continuity detection is possibleThe minimum, maximum, average and surge recording functions can automatically collect the reading changesWith other accessories, it can perform 500 mV DC measurement1000 μF capacitance measurement General Technical Specifications AC Current Through the Clamp Range 999.9 A Resolution 0.1 A Accuracy 2% ± 5 digt（10 Hz to 100 Hz） 2.5% ±5 digt (100-500 Hz) Crest factor (50 Hz/60 Hz) 3（500 A ） 2.5（600 A ） Increase by 2% when C.F.> 2 AC Current Through Flexible Current Probe Range 2500 A Resolution 0.1 A (≤ 600 A) 1 A (≤ 2500 A) Accuracy 3% ±5 位 (5 – 500 Hz) Crest factor (50/60Hz) 3.0（1100 A ） 2.5（1400 A ） 1.42（2500 A ） Increase by 2% when C.F.> 2 DC Current Range 999.9 A Resolution 0.1 A Accuracy 2% ± 5 digt AC Voltage Range 1000 V Resolution 0.1 V (≤600.0 V) 1 V (≤1000 V) Accuracy 1.5% ± 5 digt（20 Hz to 500 Hz） DC Voltage Range 1000 V Resolution 0.1 V (≤600.0 V) 1 V (≤1000 V) Accuracy 1% ± 5 digt mV/DV Range 500.0 mV Resolution 0.1 mV Accuracy 1% ± 5 digt HZ（Through Clamp） Range 5.0 Hz to 500.0 Hz Resolution 0.1 Hz Accuracy 0.5% ± 5 digt Trigger level 5 Hz to 10 Hz，≥10 A 10 Hz to 100 Hz，≥5 A 100 Hz to 500 Hz，≥10 A Hz (Via Flexible Current Probe) Range 5.0 Hz to 500.0 Hz Resolution 0.1 Hz Accuracy 0.5% ± 5 digt Trigger level 5 Hz to 20 Hz，≥25 A 20 Hz to 100 Hz，≥20 A 100 Hz to 500 Hz，≥25 A Resistance Range 60 kΩ Resolution 0.1 Ω (≤600 Ω) 1 Ω (≤6000 Ω) 10 Ω (≤60 kΩ) Accuracy 1% ± 5 Digt Capacitance Range 1000 μF Resolution 0.1 μF (≤ 100 μF) 1 μ F (≤ 1000 μF) Accuracy 1% ± 4 Digits Mechanical Specifications Highest voltage between any terminal and ground 1000 V Battery 2 AA，NEDA 15A，IEC LR6(Not Included) Work Temperature -10 °C to +50 °C Storage temperature -40 °C to +60 °C Working humidity -Non-condensing ( ≤90% RH（10 °C to 30 °C） ≤75% RH（30 °C to 40 °C） ≤45% RH（40 °C to 50 °C） Working altitude 2000 m Storage altitude 12000 m Size 249 x 85 x 45 mm Weight 395 g Jaw Open 34 mm Flexible current probe diameter 7.5 mm Flexible current probe cable length(End to wire connector) 1.8 m Safety Degree IEC 61010-1，Pollution degree 2 IEC 61010-2-032：CAT III 1000 V / CAT IV 600 V IEC 61010-2-033：CAT III 1000 V / CAT IV 600 V IP Protection level IEC 60529：IP30 FCC ID T68-FBLE IC：6627A-FBLE Notes: the batteries not included package