Dual-color temperature pure silicone neon light strip 3000-6500K Adjustable LED Waterproof flexible light strip neon strips

Full-color COB flexible light strip with intelligent color changing, low-voltage 420 lights/meter, suitable for bar and KTV decorationSuper Value Price:¥18

Pure silicone neon light strip 5*12mm ultra-narrow outdoor waterproof LED flexible soft light strip 12v neon stripsSuper Value Price:¥8

3mm COB flexible light strip 320 lights/meter low-voltage cabinet light self-adhesive non-polarized ultra-narrow LED backlight linear lightSuper Value Price:¥11

RGB COB flexible light strip with intelligent color changing, colorful FCOB light strip, low voltage 576 lights/meter, bar KTV decorative light stripSuper Value Price:¥13.5

Cross-border in-stock full-color neon silicone light strip set, colorful neon 24V low-voltage waterproof light strip set wholesaleSuper Value Price:¥110

LED flexible neon lightUtilizing high-brightness SMD 2835\5050 as the light source, flexible double-sided 35 copper FPC as the PCB board, and food-grade eco-friendly UV-resistant silicone material, it integrates traditional neon light strip technology, becoming a new generation of high-tech products. Product advantages: Flexible, it can be bent without dead angles and shaped as desired, making it particularly suitable for decorating square corners, round shapes, and irregular shapes. 2. Easy to install, DC12V/24V, SMD2835 LED beads, can be cut at a minimum interval of 1cm, after cutting the wire is directly soldered onto the FPCB, then the end cap is attached and glue is applied for installation. 3. Long lifespan, using high-brightness copper bracket lamp beads with a high color rendering index and low light decay, with a lifespan of over 25,000 hours;4. High waterproof rating, food-grade eco-friendly pure silicone, resistant to cold, yellowing, and flame retardancy, with a waterproof rating of up to IP68, suitable for installation and use in outdoor environments with water.

1. Low-voltage light strips must be used with a 12V/24V transformer power supply; do not directly connect them to 220V voltage, otherwise the light strips will be damaged.(Due to incorrect voltage connections or damage to the light strip caused by human error, returns and exchanges are not possible and after-sales warranty services are not available.)
2. One piece of light strip = 1 roll = 5m, the listed price is 1m (excluding transformer, which needs to be purchased separately). Once the product is cut, it will not be accepted for return or exchange for any reason if there is no quality issue.
3. When using 12V low-voltage light strips in series, the length should not exceed 5m; for 24V strips, the length should not exceed 10m. If a longer installation is required, please use a parallel wiring method.
4. The LED strip chips are quite fragile, so be careful during installation. Do not bend them forcefully beyond 90 degrees, as this can easily damage the LED beads. It is recommended to weld in sections at corners, and insert the small-sized aluminum channels from both sides.