Cement wall cap molding prefabricated wall cap villa courtyard wall antique tile Huizhou-style wall cap template

🧚The size units of the products in our store are all in CM (the number in front of the option specification indicates the size/cm).

🏷️模具制作流程： 1、模具内壁刷脱模油（可以用食用油代替）。 2、混凝土倒入模具。大件的可以放入钢筋增加强度（混凝土建议用425标号）。 3、震动减少气泡。可用橡胶锤敲打模具。 4、混凝土凝固后就可以脱模（凝固期间可以塑料膜盖住防止开裂，也可以持续浇水养护）。 5、脱模后继续浇水养护2-3天就可以使用。 6、清洗模具，重新制作。

🍒The mold dimensions have a slope of 0.6%-1.5% to facilitate the removal of precast products from the mold.

🍒All molds are injection molded from 100% PP material or ABS raw material. Durable and impact-resistant, guaranteed to withstand over 80-200 repeated uses unless damaged by human actions.  

🏷️脱模剂介绍 脱模剂是可以使模具与混凝土之间无损脱离，保护模具使模具能循环使用，也可以减少混凝土表面气泡蜂窝， 使用如下:模具内壁喷涂专用的油性混凝土脱模剂即可，方便完工后无损脱模，以防模具加速老化破裂。 🏷️脱模油使用说明 🏷️Note: It is recommended to use a specialized oil-based concrete release agent for demolding. You can also use cooking oil from home as a substitute. Do not use gasoline, diesel, waste oil, and other volatile oils on the mold, as they will cause corrosion.