W3001 220V Digital Temperature Controller Blower Fan Digital Temperature Controller Thermostat for Egg Incubator Timer Sensor

Features:【Two Types】There are two types for choose: 1pc exhaust fan,Application scope: KTV cabinet, industrial control chassis industrial fan, solder exhaust fan,Or you can choose 1pc temperature controller.Temperature control range :-50-110℃.【Easy To Use】Easy to use, it can be turned off when not in use, avoiding direct power failure, prolonging service life, saving electricity and safer.Super quiet, uniform wind, faster speed, strong suction, safe and effective removal of welding fumes, giving you a healthy air.【Compact And Versatile】Compact and versatile. Can be installed.For cooling and ventilation solution for any room in your home, including attic, garage, shed and more.Exhaust fan:12x12x3.8cm,temperature controller:60x45x31mm.【Temperature Controller】Switch the modes between cool and heat.Control temperature by setting the temperature setting value and the difference value.It controls the heating system and automatically maintains temperature within the temperature deference range.【Temperature Controller Use Notice】When setting the heating mode, if you accidentally reverse the set temperature value, the output indicator light will not light up and the load will not work. If the above situation occurs after the setting is completed, you can check whether the set temperature value is reversed.Temperature Controller Use Method:Set the start temperature: Press the up key once to display the start temperature. Press and hold the up key for about 3 seconds. The start temperature number flashes. You can use the up and down keys to set the desired temperature valueSet the stop temperature: Press the down key once to display the stop temperature. Press and hold the down key for about 3 seconds. The stop temperature number flashes. You can use the up and down keys to set the desired temperature valueHow to restore factory settings: When the power is on, press and hold the up and down keys at the same time. The digital tube displays 888 and then automatically jumps to the detection temperature, that is, restore the factory settings.Specifications:Type: exhaust fan,digital thermostatExhaust Fan:Material: plasticColor: blackCurrent: 0.14Speed: 2200-2400Air volume: 2.58/3.15 (M3/min)Application scope: KTV cabinet, industrial control chassis industrial fan, solder exhaust fanNumber of blades: 5Size(about): 12x12x3.8cm/4.72x4.72x1.5inch(LxWxH)Digital Thermostat:Material: plasticColor: whiteControl accuracy: 0.1℃Temperature measurement range :-50-110℃Temperature control range :-50-110℃Output type: Direct outputMeasurement input :NTC10KOutput capacity: MAX10ASize(about): 60x45x31mm/2.36x1.77x1.22inch(HxLxW)Package Included:1pc x exhaust fanOr1pc x temperature controllerNote:1. Due to the light and screen difference, the item's color may be slightly different from the pictures.2. Please allow 0.5-2 cm differences due to manual measurement.