Pioneer Pearl Glaze GLOSS Finish 4L High Performance Epoxy Topcoat Finish For Tanks Ships Bridges

Pioneer Pearl GlazeEpoxy topcoat finish. High performance marine applications.DescriptionIt is an epoxy-based resin, which yields a flexible film with a very high impact resistance and superior protection against saltwater, acids, alkalis and other destructive elements. It is compatible with any other primer or solvent.​Packaging​​1L can set, 4L can set​​​​ApplicationsIt is used with maximum efficiency in storage tanks, cars, bridges. ships, industrial equipment and other objects requiring a protective coating that is tough and chemically resistantColors (Satin & Gloss)WhiteSafety BlackSafety RedSafety BlueSafety OrangeSafety YellowSafety GreenUltramarine BlueCaterpillar YellowVisMin OrangeNile GreenVisMin UltramarineDirections for useSurface PreparationSurface must be dry, clean, and free from grease and oils, rust, loose particles and other contaminants in order to ensure a good adhesion of the paint. Sand into a smooth surface. The cleaned surface must be primed before applying or topcoating with Pioneer Pearl Glaze. To smooth surface imperfections, use Pioneer Epoxy Adhesives.​​MethodAdd one (1) part Pearl Catalyst to three (3) parts Pearl Glaze Epoxy Top coat base. Let it stand for thirty (30) minutes before application. Prepare a sufficient quantity of epoxy paint catalyst combination good for 2-3 hours use as this solution has limited pot life. Use an epoxy reducer to thin down to spray viscosity​CleaningClean all tools or equipment used while coating is still in its uncured state. Use Pioneer Epoxy Reducer or lacquer thinner to clean tools and spills.