Complete Incubator Cooling Kit 220V XH‑W3001 Digital Temp Controller & 120×120mm Metal Blower Fan Ventilation System for Chicken Duck Egg Hatching Incubator Projects

BEST FOR EGG INCUBATORFEATURES:A. FAN BLOWER 220V1000 RPM Fan SpeedAC: 220-240VFrequency: 50-60hz 58CFM Air Flow 18/20W Power ConsumptionMaterial：Metal/ PlasticSize: Height x Weight x Length - 120x120x38MMB. TEMPERATURE CONTROLLER XH-W3001Product model: XH - W3001Power supply voltage: 220VTemperature measurement range:- 50 °C ~ 110 °CTemperature control precision: 50 °C ~ 110 °CTemperature control accuracy: 0.1 °CLoad power :1500wMeasurement input: NTC10K waterproof probe L=1 mOutput type: Direct outputOutput capacity: 10AMounting hole spacing: 73mm (aperture: 4mm)Exterior dimensions: 60 * 45 * 31 mmBENEFITS:Easy to install and setupHOW TOs:Best for egg incubator useInstructions:1.To set the startup temperature:Press the up button once to display the startup temperature, press and hold the up button for about 3 seconds, the startup temperature number will flash, and the desired temperature value can be set by the up and down buttons2.Set stop temperature:Press the down button once to display the stop temperature, long press the button for about 3 seconds, the stop temperature number will flash, and the desired temperature value can be set by the up and down buttons3.reset:When the power is on, press and hold the up and down keys at the same time, the digital tube displays 888 and then automatically jumps to the detection temperature, that is, restores the factory settings