btnx (ATU) 1.8-54MHz MAT-600A-HF HAM Radio 600W High Power Universal Automatic Antenna Tuner R6P8Q

Specifications:Model: mAT-600ATuning Power: 5–15WMax. RF Power: 600W PEP (SSB)Frequency Range: 1.8–54 MHzTuning Time:Full Tune: ≤ 8 secMemory Recall: 0.1 secChannels: 16,000 storedPower Supply: DC 12–14V, ≥1AOperating Temp: -10°C to +60°C (14°F to 140°F)Dimensions: 192 x 75 x 193 mm (LxWxH)Weight: 1.9 kg (4.2 lbs)Features:1.Universal CompatibilityWorks with most HF radios without dedicated data cables. Plug-and-play setup!2.High Power HandlingSupports up to 600W PEP (SSB) – Ideal for powerful HF stations.3.Wide Frequency CoverageTunes 1.8–54 MHz, including all HF bands + 6m (50-54MHz).4.Lightning-Fast Tuning• Full Tuning: ≤ 8 seconds• Memory Recall: 0.1 second (uses stored settings)5.Massive MemoryStores 16,000 tuning profiles – Perfect for multi-antenna setups or frequent band changes.6.Simple One-Button OperationPress [UTE] (User Tuning Experience) for 1 second while transmitting low power (5-15W) to start tuning.Tuning operation steps1. Set the radio to the required frequency, set the transmission power to 10W, andSet the formula to one of CW, FM, FSK, and RTTY2. If you use a linear amplifier, please switch it to pass-through state and stopAbsolute amplification function.3. Press and hold the PTT button of the radio hand (using the CW mode to transmit) and let the radio send a stable carrier to the sky tune.4. Press the [TUNE] button of Tiantuo and hold it for 1 second before releasing it to startWhen the tuning is activated, the "TUNING" indicator light on the front panel is lit, and the sky tune will make a louder sound during the tuning process.5. When the "TUNING" indicator light goes out, the sky tune will no longer make a sound.The tuning of the sky is over. If the "ONLINE" indicator light indicates that the sky tune is successfully tuned, and if the sky tune is turned off, the sky tune failed.6. If the tuning is successful, please restore the power and mode of the station to the settings you need. If you use a linear amplifier, you can set it to amplification state and you can transmit normally.7. If you have changed the operating frequency of the radio, please repeat steps 1-6 before the first launch.