104 103CM Inflatable Heart Shaped Pool Float Oversized Love Heart Swim Ring with Thick PVC for Adults Couples Heavy Duty Donut

Step 1: PreparationUnfold the product completely on a clean, flat surface away from sharp objects.Locate the air valve (inflation hole) on the swim ring. Open the valve cap.Step 2: Important Notice for Cold WeatherIf the weather temperature is too low upon receipt, please soak the product in 60°C (140°F) warm water for 5 minutes before inflation.This will soften the material and make it easier to inflate without damaging the seams.Step 3: Connect the PumpPrepare your manual or foot pump (not included if sold separately, but usually included in the package).Find the correct nozzle/adapter that fits snugly into the air valve.Insert the pump nozzle firmly into the valve opening.Step 4: InflateBegin pumping continuously.Inflate the float to about 80% to 90% fullness (it should feel firm but still have a little give when pressed).Note: Do not over-inflate, as direct sunlight can cause the air inside to expand and potentially damage the seam.Step 5: Seal QuicklyOnce the desired firmness is reached, quickly pull out the pump nozzle.Immediately press the valve stem down or close the valve cap tightly to prevent air from escaping.Step 6: Final CheckPress down on the float to check for any air leaks.Ensure the valve is securely closed before placing it in the water.Safety Tip:Always supervise children while they are using the float. Avoid contact with sharp rocks or tools.