Elitaone Bicycle Seat Post Carbon MTB/Road Bike Seatpost Setback 5mm Master Series 25.4/27.2/30.9/31.6mm

elitaone Master series Carbon Seat post Setback 5mm Carbon fiber half shellCarbon Half Shell InstallationTo install a Ø 7 mm round rail saddle: first install the Carbon Half Shell 7X7, then install the Carbon Half Shell BASETo install a Ø 7x9 mm oval carbon rail saddle: first install the Carbon Half Shell 7X9, then install the Carbon Half Shell BASEMaterial：CarbonClamp diameter：Ø 25.4-27,2-30.9-31.6mmSetback：5mmClamp diameter：Ø 7 mm or 7x9 mm oval(carbonhalf-shells for both included)Lenghts：350 mm or 400 mmMinimum Insert：100 mmFinish: MatteScrews: TitaniumSeatpost maximum locking torque：5.5nmSaddle clamp tightening torque:8-12NMMax. Permissible Weight:120 kg (265 lb)Suitable for Ø 7 mm or 7x9 mm oval(Carbon fiber half shell)Installation Instructions1.Seat TubeTightening TorqueFor metal bicycle frames, tighten to 4NmFor carbon fiber frames, tighten to 4.5NmMaximum locking torque: 5.5Nm2. Saddle clamp tightening torqueRecommended tightening to 8-12Nm3.Installation WarningsEnsure that the clamp opening is offset from the frame opening duringinstallation to avoid concentrated stress that may cause the seat post tocrack.(NOTICE:For openings at both front and rear, the seat post clamp should beoffset to the side.)Suggestion: Insert the seat post into the frame 10 cm.