POROMETISTO | DSF01 6-in-1 Multifunction Stud Finder Wall Scanner - Wood/Metal/Live AC Wire Detector Deep/Exact Mode LCD+Buzzer+LED Alarm

DSF01, 6 in 1 Stud Finder Wall Scanner – Wood / Metal / Live AC Wire Detector, Deep & Exact Mode, LCD Display, Buzzer & LED, for Wall Ceiling FloorFeatures:1. 6-in-1 detection – Finds ferrous metals, non-ferrous metals (copper), wood studs, and live AC wires (≤50mm).2. 2 wood stud modes – Exact mode (≤20mm) / Deep mode (≤38mm).3. Deep metal scanning – Ferrous ≤120mm, copper ≤100mm.4. Dual calibration – Auto or manual for accurate readings.5. LED + buzzer alarm – 3 stage indicator (ready → approaching → target), buzzer can be turned off.6. Large LCD display – Shows mode, depth, signal strength, battery level, center point, and inch/cm switch.7. Ergonomic design – Soft rubber back protects walls, comfortable grip.8. Auto power off – After 5 minutes of no operation.Specifications:Power：1 x 9V battery (NOT included)Operating temp：-10~50°C/14~122℉Operating relative humidity: 35~55%RHMax depth (ferrous)：≤ 120mm/4.72inMax depth (Non-ferrous metals——copper)：≤ 100mm/3.94inMax depth (live AC wire)：≤ 50mm/1.97inWood stud (exact mode)：≤ 20mm/0.79inWood stud (deep mode)：≤ 38mm/1.50inMagnetic indication：YesSound on/off：YesBattery level indicator：YesAuto shutdown：~5 minIf AC wire detection is inaccurate, the wire may be shielded by PVC pipe. Switch to metal mode – this is not a product defect.How to Use:Place scanner flat on wall, select mode;Wait for green light (calibration);Keep tightly attached, move slowly left & right (do NOT lift off, do NOT move up/down);Follow signal bar, LED, and beep to locate center.Package Includes:1 x DSF01 Stud Finder1 x Manual1 x Cloth bagNote：--Manual measurement may cause 1-3mm deviation--Battery not included (9V)