OnlyF U Synchronous Pulley Milling Cutter 3m/5M/8M/T5/5.0 /T2.032/9.525/T10/S5M/14M/20M/12.7/ S3M T2Y7B

Hign-concerned Chemical : None Origin : Mainland ChinaSteps for selecting non-standard hobs1. Determine the hob type and accuracyThe selection of hob type and accuracy should be based on the processing equipment and technology. The hob module (or diameter pitch, circumferential pitch) and pressure angle should be equal to the gear being cut, and the spiral direction should be the same as the gear being cut. When processing spur gears, right-hand hobs should be preferred.2. Determine the full tooth height of the hob3. Determine the normal tooth thickness, axial tooth thickness, and tooth top height of the hob4. Determine the hob modification and tooth tip arc5. Check the "Atlas" to select the hob.6. Check the hob axial tooth thickness Sx