DOMRAEM ESP32 WLED Controller 4CH 16A Fuse Mic Sound Reactive Low Power HA Alexa Compatible WS281X SK6812 RGBIC LED Strip DIY

DOMRAEM ESP32 WLED 4-Channel Addressable Controller with Mic                        🌟 DOM-Z-104 (DC5V–24V, 16A Fuse) 🌟This controller features convenient screw terminals and 4 independent output channels, making connection easy and configuration flexible. It comes pre‑flashed with the open‑source WLED firmware, supporting over 16 million colors. Control it directly from your iOS or Android device to create stunning DIY lighting effects with ease. ✨WLED Controller Operation Guide⚠️ After any reset or OTA update: GPIO12 must be configured first, then briefly press the reset button or power cycle the controller (refer to the manual for detailed steps).💡 If LEDs do not light up: Check GPIO12 configuration → if incorrect, reconfigure and reboot; if correct, inspect the power supply circuit.Features🔌 Dual High-Power DC InputsEquipped with a built‑in 16A fuse and two independent 5–24V wide‑voltage input terminals. Delivers up to 16A total output, providing reliable power for extra‑long LED strips. Standby power consumption is only ~0.5W.🎤 Built-in Microphone for Real-Time Music SyncFeatures a high‑sensitivity built‑in microphone that enables real‑time music synchronization, allowing the lights to react dynamically to ambient sound for an immersive audiovisual experience.🎨 100+ Built-in Lighting Effects, One-Tap SwitchingPre‑loaded with the popular WLED firmware, offering over 100 built‑in lighting effects (e.g., Rainbow Gradient, Breathing) that can be switched with a single tap via the mobile app or web interface.📱 Smart Control, Anytime, AnywhereCompatible with iOS and Android devices, allowing real‑time lighting control through the mobile app or web interface from anywhere.✂️ Independent Segment Control for Advanced CreativityDivide a single LED strip into multiple independent segments, each with its own lighting effect, enabling complex setups and advanced creative possibilities.🌐 Wide Compatibility & Reliable DesignBroadly compatible with mainstream digital LED strips, including WS2811, WS2812, WS2812B, WS2813, WS2814, WS2815, WS2805, SK6812, SK19703, SK16703, SM16703SP3, FL19308, FW1935, TM1814, and APA102 (covering DIMMER, CCT, RGB, RGBW, and RGBCCT types). Built for reliability with a high‑performance ESP32 module, NXP high‑speed cache chip, and a combination of solid‑state and large electrolytic capacitors for stable signal transmission and long‑term durability.📋 Specifications:Model: DOM-Z-104DC Input Voltage: 5V–12V–24VMax Output Current: 16A (total)Pixel Support: 800 pixels per channel, 3200 pixels total (4 channels)Compatible Strips: WS2811, WS2812/2B/3/5, SK6812, APA102, etc.Dimensions: 109.5 × 46 × 17.5mm