For SOMMER 4013 TX03 434 4 XP 4022 TX02-434-2 4014 TX03-434-2 434.42MHz Garage Dooor Remote Control Hand Transmitter

When to ship ?We are the seller with the fastest delivery on the platform. When we receive your order, we will send your package within 12 hours.NOTE - NOTE - NOTEPlease double check the frequency behind your remote control, if you buy the wrong remote control yourself, we will not be responsible, thank you。If you can't read the text clearly, please see if your remote control LED lights are green and orange.Disclaimer: It is not compatible with other remote controls, we will not be responsible for the wrong purchase.Access to receiver required. Please make sure you got access to your receiver / opener before purchase.. If you cannot access the receiver, please do not buy this product. Thank you.Compatible ModelsSOMMER 4014 TX03-434-2SOMMER 4022 TX02-434-2SOMMER 4013 TX03-434-4-XPAccess to receiver required. Please make sure you got access to your receiver/opener before purchase.Disclaimer: Your remote control must be the same as the picture and your model must be in the list, we will not be responsible for wrong purchase.Specifications1. Model：YNG3081. Type of programming：Programming with the receiver2. Frequency：434.42 MHz3. Code：Rolling Code4. Buttons：45. Battery：Include BatteryFeaturesWhen your remote control is lost, you can buy our remote control and pair it with your receiver, after the remote control is programmed successfully, you will get a new remote control.How to program it ?The remote control is the same function as your original remote.it should programming with original receiver according to your original Manual when you get it.1. Locate the Learn / Code Set button on the motor. This is usually under the lamp cover, or on the back of the motor.2. Press the Learn / Code Set button once, then let go. A light should illuminate.3. Press the desired transmitter button once, and the light will go out.4. Press the remote again the the light will flash on the motor and then go out, signifying the remote has been coded. 5. Test the operation of the remote.