Bicycle Chain Repair Tool Set Cycling Maintenance Chain Wear Indicators MTB Non-slip Handle Chain Pliers with Tail Accessories

Bicycle Chain Quick-link Pliers Usage Steps:1. Align the Quick LinkLocate the quick-release link on your bike chain, then fit the plier’s jaw slot over the two metal tabs of the quick link.2. Clamp and Apply ForceGrip the plier handles, gently close the jaws to secure them onto the quick link’s sides. Then slowly squeeze the handles until the quick link’s spring tab pops open and the chain separates.3. Detach the ChainOnce the quick link is loosened, remove it directly to split the chain. You can also use the pliers to help clamp a new quick link when reinstalling.Pls avoid excessive force during operation to prevent damage to the quick link or pliers.Quick links have a usage limit (recommended for ≤5 disassembly cycles). If the link is deformed after removal, replace it with a new one.Compatible Chain Speed Installation Steps:1. Prepare the ChainSplit your bike chain (use the quick-link pliers mentioned earlier), then align the two ends of the chain.2. Attach the Quick LinkInsert one half of the quick link into the end of one chain segment, and the other half into the end of the other segment. Ensure the pins of the quick link fit into the chain’s inner plates.3. Lock the LinkGently pull the chain to align the quick link, then use your hands (or the pliers) to press the two sides of the quick link until it clicks into place. Finally, check if it’s securely locked by pulling the chain slightly.Each quick link is recommended for ≤5 disassembly cycles (replace it with a new one once worn).Choose the quick link that matches your chain’s speed (e.g., 9S for 9-speed chains) for proper fit.NoteDue to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.