New Door Window Burglar Alarm Sensor Wireless Remote Control Anti-Theft Alarm System Kit Home Security Door Open Detectors

The alarm kit is usually paired, but the additional remote control and alarm host need to be paired by the buyer themselvesMethod for connecting the alarm host to the remote control:1. Remove the host battery for 2 minutes, then reinstall the battery2. After the host emits a Bi sound, please hold down the learning code button on the remote control within 2 seconds. After about 10 seconds, the host emits a Bi sound, indicating that the host has entered learning mode.3. At this time, please release the remote control. Press the deploy or disarm button on the remote control again, and the host will emit a Bi sound twice, indicating successful code learning.Door Alarm Wireless Remote Control Anti-Theft Door And Window Security Alarms Sensor for Do-It-Yourself Home Security System. Many burglaries occur from break-ins through doors/ windows, especially side, rear and garage doors. This door security devices with 105 dB loud alarm sound can help to deter the intruder, wake or alert you if at home and possibly alert neighbors. The wireless door alarm have 4 modes--- Arm/Disarm/Panic/Doorbell mode controlled by the remote, wireless control range up to 49 ft. Not only a DIY door and window alarm, but also a door open chime/ pool alarm for kids safety or helps notify you if kids/ pets or visitors coming/ going, and emergency alert system for the older/ patients.Feature:Arm/Disarm/Panic/Doorbell mode controlled by the remoteMagnetically triggered alarm suitable for Doors or WindowsMore alarms and remotes available for pairingDetering thieves effectively by 105dB loud alarmSimple peel and stick installationSpecifications:1.An alarm need two AAA alkaline batteries ( not included )2.A remote need a 12V/27A alkaline battery ( included )3.They can work for at least a year with low-consumption design4.Product size: Alarm( 3.351.570.59 inch), Remote( 2.481.18 inch), Magnet box(1.770.47 inch)5.Package weight: 71 gPackage Including:1* Door Alarm1* Magnet Sensor1* Remote Control3* Adhesive Tape1* User ManualWhen the door and window are separated (the door magnetic host and the magnetic strip are separated), the alarm immediately sounds an alarm.Door magnet has two modes, one is anti-theft alarm mode and the other is Ding Dong mode, which can be used in stores.2Multi-purpose:Suitable for various types of doors windows (sliding/crank/hung....doors and windows ), cabinets, and drawers...One host can match up to 8 remote controllers, and one remote controller can match up to 50 alarm hostsPress the arming button on the remote control in standby mode, the main unit will ring “Bi Bi Bi”, and the host enters the arming mode. Wall remote control -No serial code, no code lossInstallation Instruction:There is double-sided adhesive on the Alarm and Magnet box, just peel and stick to doors.Note:The 2 parts need be aligned by their alignment arrow.The Distance between them should be less than 10 mm.How to pair alarms with your remote?1.Change to disarm mode by the remote.2.Put one battery into the alarm need be paired at first.3.When put the other one into the alarm need be paired, press and hold the doorbell button of the remote.4.After you hear a "Bi...", press arm button once.5.Then the alarm will sound two "Bi... Bi...".6.It is well done. When you encounter a thief or other emergency at home, pressing the emergency button on the remote will sound a 30 second alarm, and the emergency function button will work in any mode. 1. When the host is not in the armed mode, press the doorbell button on the remote control. The receiving host will prompt the doorbell to DingDong.. and enter the doorbell mode. In this mode, the door and window are opened to ring the doorbell to remind the door and window to be opened.2. Press the exit doorbell button or press the arming button in the doorbell mode to automatically exit the doorbell mode.Installation DisplayDuring installation, the magnetic strip is tightly mounted within 1 cm of the host, so that the door and window can be alarmed when the door and window are opened.The door is installed in parallel with the door frame Glass door installationSliding window installation      Casement window installation How to use your remote?1.Arm Mode: When you press arm button, the alarm will sound "Bi Bi Bi". And 15 seconds later it will sound "Bi" to indicate that the alarm is in arm mode.2.Disarm Mode: When you press disarm button once, the arm will sound a long "Bi..." to indicate that the alarm is in disarm mode.3.Panic Mode: (for emergencies) When you press panic button, the alarm will alarm 30 seconds immediately. It is effective in any mode.4.Doorbell Mode: When you change the alarm to disarm mode and press doorbell button, it will sound "dingdong" to indicate that the alarm is in doorbell mode.Product Size:Alarm (3.351.570.59 inch)Remote (2.481.18 inch)Magnet stripe (1.770.47 inch)