MCB Type Dual Power Automatic Transfer Switch 2P 63A ATS Micro Circuit Breaker Electrical Switch

Feature：1.Dual power switch: A dual power conversion switch is used to switch between two power sources, including a common power source and an emergency power source. When the public power supply is cut off, the emergency power supply begins to supply power. After the normal power supply is connected, it will return to the public power supply.2.Protection function: The switch supports multiple protection functions, including short circuit, overload, phase loss, and undervoltage protection.3.Automatic and manual: The automatic switch not only supports automatic mode, but can also be operated through manual buttons, with simple operation and reliable performance.4.Easy to install: With a reasonable structure, compact size, and equipped with a protective cover, the power supply installation is simple and reliable.5.Widely applicable: The switch can be used in households and public places, especially suitable for office buildings and public places that require fire protection.Specification：ATS level: CB levelUsage level: AC-33iBUsage level: AC-33iBLine voltage: AC230VLine current: 6-63AWorking frequency: 50Hz/60HzDisplay function: indicator light displayProduct List:Dual power conversion switch * 1💥[Wiring Explanation]: 1. If both circuits are powered by AC, the live and neutral wires must be connected correctly. Connect the live wire to port 1 and the neutral wire to port N. If the frequently used connection is 1 (live wire)/N (neutral wire), and the spare connection is N (live wire)/1 (neutral wire), the controller will be damaged.2. The green terminal output on the product has power (220V). No power supply should be connected; doing so will cause a short circuit.💥[Indicator Light Explanation]:1. Power Indicator Light: Lights up when there is power. If it doesn't light up, there is generally a problem with the power input.2. Circuit Closer Indicator Light: The light illuminates whichever circuit is in use.💥[Measuring Input Voltage with a Multimeter]: The voltage must be between 170V and 240V for normal operation.💥[Modes]:1. Automatic Mode: The product will automatically switch modes.2. Manual Mode: The product can only be switched manually by turning the handle.