ZETA Dental wireless LED curing machine oral resin whitening light sensitive machine light UV lamp

Curing Light LED. B TypeThis light-curing machine with adjustable working hours, working time visual, curing effciency higher characteristic. This light-curing machine equipped with charging status recognized by charging stands ( charging: the indicator light; charging end: led BAA; left: LED shining host ) This light-curing machine at work, every 5 seconds buzzer "di" tone, while at the same time shows the time remaining on th display; non-work time, 120 seconds without any key is pressed, the light-curing machineautomatically shu down to conserve battery power; shut down state, press any key to boot._______________________________________Features:
1. Selection of high power LED, light intensity is high, long service life;
2. Cold light source, less heat and a long time of use;
3. Beautiful and has excellent heat transfer;
4. A variety of work mode options: light, mode ; Gradually light mode; Pulse mode
5. Automatic shutdown, low-power alarm;
6. Display tube using digital work time, clarity, and time can be in controlled in 5-40s;
7. Sleep screensavers function, saving power
8. Automatic memory function-automatic saves last job when the function and the number of the seconds.______________________________________Technical Parameter:Charger input：110V-240VAC 50-60HzThe charger output： DC4.2V 1000mALithium battery voltage： DC4.2VLithium battery capacity： 2000mAhOutput optical wavelength： 420-480nmOutput light intensity： 1400mw/cm2_______________________________________Function Keys:ON/OFF button：(1) Turn on or turn off the LED blue-ray output(2) Can make the machine runTIME button ：(1) You can set the working time (10s, 20s, 30s, 40s)(2) Can make the machine run_______________________________________USING TIPS:When light curing a resin composite restoration, dentists are recommended to:1. Position the light tip as close as possible and parallel to the restoration, when using curing light.2. The use of orange filters are needed, for protect the dentist from eye damage during curing; to prevent the tooth from overheating.3. When the light intensity of the machine becomes weak, you can charge it to improve performance.