FORTRESS E PRIMER CONCRETE WHITE PART A&B GAL/SET

✨ FORTRESS EPOXY PRIMER CONCRETE WHITE (PART A & B) – Gallon Set ✨Build a stronger, longer-lasting foundation for your floor coating projects! 💪🏢Why Choose Fortress Epoxy Primer?⚡ Outstanding adhesion between coats ⚡ Excellent protection against corrosion ⚡ Smooth and easy to applyGive your floors the reliable base they deserve. Order yours today! 💙#FortressEpoxyPrimer #FloorCoating #ConcretePrimer #EpoxyPrimer #StrengthInEveryLayer📐 Estimated Coverage: • Covers approximately 12–15 sq.m. per gallon set at 100–150 microns dry film thickness (DFT). Actual coverage may vary depending on surface condition, mixing, and application losses.🛠️ Mixing Instructions: • Stir Part A and Part B thoroughly before mixing. • Combine 2 parts of Component A with 1 part of Component B (by volume). • Mix only the amount that can be applied within the product's working (pot-life) time.🎨 Application Guide: • Apply one full coat of Fortress Epoxy Primer White using a brush or roller to achieve a smooth, continuous coating. • Make sure the primed surface remains clean and free from dust, moisture, and condensation. • If a second coat is specified, allow 3–4 hours of drying time before recoating.⚠️ Important Reminders: • Test existing or old paint coatings for compatibility before application to avoid lifting. • Prolonged exposure to sunlight and high temperatures may cause slight color fading, gloss reduction, or chalking. These changes are cosmetic only and do not affect the coating's protective performance or durability.✅ Health & Safety: • Wear appropriate gloves and a face mask during application. • If the product comes into contact with the skin or eyes, rinse immediately with clean water. • Seek medical attention if irritation continues. • Always apply in a well-ventilated area.💙 Fortress Epoxy Primer – The Strong Foundation Every Durable Floor Needs!