EMJ Nikko Engine Coating 550°F / Flameproof Coating 1200°F Spray Paint Box Wholesale | Heat Resistant for Engine Generator Oven Stove Spray Paint

Nikko Hi-Temp Engine Coating Solvent Resistant 550F Spray PaintFast-dry aerosol paint formulated to hot jobs.Sustains temperature up to 550F that is solvent resistant and good application for                   a. automotive engine                   b. generator                   c. any metal workslasting protection that doesn’t flake or peel when exposed to high temperature.Direction of Use:1. Clean surface thoroughly to be free from rust, dirt and grease.2. Shake can thoroughly 2 minutes before using and shake periodically during spray.3. Spray from a distance of about 1 foot.4. For better result apply several thin coatings with an interval of 10minutes.5. After spraying turn can upside down and press spray head to clean spray nozzle.ReminderClean the surface, it must be free from oil, rust, and dirt. ( please use degreaser, if needed)Heat the surface before spraying.Do not spray during cold weather.Allow at least 3 days for drying.   Nikko Flameproof Coating Specially formulated on a pure silicone resin and heat resin and heat resisting pigment which will give the highest heat resistance.All colors do not contain lead and mercury and are most suitable for the industrial application where the resistance to high heat of up to 1200F is of prime importance, such as         a. exhausting pipe         b. heating furnace         c. stoveDirection of Use:1. Clean surface thoroughly to be free from rust, dirt and grease.2. Shake can thoroughly 2 minutes before using and shake periodically during spray.3. Spray from a distance of about 1 foot.4. For better result apply several thin coatings with an interval of 10minutes.5. After spraying turn can upside down and press spray head to clean spray nozzle.ReminderClean the surface, it must be free from oil, rust, and dirt. ( please use degreaser, if needed)Heat the surface before spraying.Do not spray during cold weather.Allow at least 3 days for drying.