1000W Hot Melter PPR Water Pipes Heating Machine Fusion Machine Welding Adjustment Up To 300° CUTTER+BOX Welding Machine Kit Heating Tool

Product specifications:1000WMaterial: ABS+alloyPower: 1000WVoltage: 220V-240VAmbient temperature: -20-50°CRelative humidity: 45% to 95%Heating head temperature: 260±5°CScissorsPackage Size:1226.53cmWeight:405GMaterial:Plastic+SteelPacking list:1Hot melt machine13 sets of die heads1Installation tools1water pipe scissorsInstruction:*Install the heatsink on the fixed welding device, place the welding device on the rack, install the corresponding heating die according to the required pipe specifications, and use the spanner to tighten, usually small in the front end in the back.*Power on: power on (pay attention to the power must be with a ground protection line), the green indicator light, until the green light is off, the red light is on, indicating that the fuse into the automatic temperature control state, you can start operation. Note: In the automatic temperature control state, red light, green light will be alternately lit, indicating that the fuse is in a controlled state, does not affect the operation.*Welded pipe: pipe cutter with a straight cut off the pipe, the pipe and pipe at the same time without rotating into the fuse die, and in accordance with the requirements of the table to operate, to the heating time immediately after the pipe and pipe removed from the die at the same time , Quickly and without rotation directly into the required depth of uniform, so that the joints open into uniform flange