SCHNEIDER MCCB Breaker EZC100H 2P/DIRECT DISTRIBUTOR

The 2-pole Molded Case Circuit Breakers (MCCBs) in the 15AT to 100AT range, typically represented by the Schneider Electric EasyPact EZC100 series, are foundational devices for electrical distribution in buildings and industries, as commonly supplied by dealers like Nets Electrical Services. These breakers are engineered to provide essential protection against overcurrents and short circuits for two conductors (2-pole configuration) in low-voltage installations. Key Features of Schneider EasyPact EZC100 2-Pole MCCBs (15AT - 100AT)Current and ProtectionFeatureDescriptionRated Current (In)Available in discrete fixed ratings from 15A up to 100A. This is the maximum current the breaker is designed to carry continuously.Trip Unit TechnologyUtilizes a Thermal-Magnetic (TM-D) trip unit, which provides fixed, non-adjustable protection.Thermal Protection (Overload)Protects against sustained, non-safe overcurrents (overload). The trip setting is fixed at the rated current.Magnetic Protection (Short-Circuit)Provides instantaneous tripping for very high fault currents (short circuits). This setting is also fixed.Pole Configuration2-pole (2P) design, used for protecting two conductors in single-phase or DC systems.PerformanceFeatureDescriptionBreaking Capacity (Icu)The maximum short-circuit current the breaker can safely interrupt. The EZC100 series offers different performance levels, such as:EZC100F: Typically 10 kA at 400/415 V AC.EZC100N: Typically 18 kA at 400/415 V AC.EZC100H: Typically 30 kA at 400/415 V AC (often referenced as 50 kA at 220/240 V AC).Suitability for IsolationAll EZC breakers are certified as suitable for isolation (conforming to IEC 60947-2), which guarantees the contacts are safely open when in the "OFF" position for maintenance work.Mechanical and InstallationFrame Size: Breakers across the 15A to 100A range share the same compact physical EZC100 frame size, allowing for easy and consistent integration into electrical panels and switchboards.Mounting: They are commonly supplied as fixed-mount devices, designed for installation directly onto a backplate or DIN rail (with a dedicated adaptor). Connections: They feature front connections, allowing for cable lugs to be screwed directly inside the breaker for a secure termination. Auxiliaries: The EasyPact EZC line supports a range of field-installable optional accessories, including:Shunt Trip (SHT): For remote electrical tripping.Undervoltage Release (UVR): To trip the breaker if the supply voltage drops below a specified level. Auxiliary and Alarm Contacts (AX/AL): For remote indication of the breaker's status (ON/OFF/Tripped).