QIAO | Easy Mix 1:1 Epoxy Resin Kit Crystal Clear-Not Yellowing No Bubble Self Leveling Casting & Coating Resin for DIY Jewelry Making

Precautions (please read carefully before use):1: Resin glue curing speed is related to volume size and temperature, the thicker the adhesive layer, the faster the curing, the higher the temperature, the faster the curing.Therefore, the more mixing, the shorter the operating time, the larger the size of the seal will be, the slower the reverse.2: Resin and curing agent reaction will be hot, the thicker the glue layer will produce more heat, heat assembly has bubbles produced, so the matching glue to be used quickly, brush thin will solidify slowly.3: A,B two groups should be strictly proportional weighing, B components too much or too little will affect the performance of the curing; A, B two components mixed, must stir evenly, stirring uneven will cause part of the curing, part of the non-curing condition. If you are a beginner, please use an electronic scale to easily confirm the ratio of A glue to B glue.4: Glue in the curing process, curing agent will suck tide, when the air humidity is large, after curing the surface will have a layer of oily feeling, so the curing process to keep dry, do not solidify in the humidity of the environment, when the oil is produced, you can dry the surface, and then sandpaper grinding.5: When the temperature is low, the A part will have crystallization phenomenon, such as the production of granular rubber slag or completely frozen, when the use of a glue can be heated, the temperature will be open, after the opening can be used normally, does not affect the performance.6: Use is careful not to touch the skin, contact with the skin sometimes there will be allergic phenomenon produced! Please wear disposable gloves during the DIY crafts making process.