ZZSA 400S X Axis Power Feed Kit For Bridgeport Milling Machine 0-200RPM 450 in-lb Torque Low Noise Precise Bearing Durable 7M5T2

Package include:1 set of 400S X-Axis Power Feed Kit Product show:Installation Instructions:1.Before installation, be sure to turn off the power supply of the milling machine. Don't install the power feed under live condition.2.The product is supplied by AC110V 50/60Hz (Please
 prepare the required power supply for the product). If the product is used in a region not in conformity with the national power supply, please prepare a transformer, avoid using incorrect power supply and result in damage of the product.3.The product is provided with overload protection, the power supply will be cut out in case of overload or stuck. It can be reset automatically by restarting the power switch.4.Check whether spiral gear oil is enough when carrying out maintenance. Open the carbon brush cover semiannually to check whether the carbon brush is worn. If the length is less than 7mm,it is recommended to replace the two sets of carbon brushes at the same time.X-Axis Power Feed Kit For Milling MachineX-axis power feed kit is equipped with sturdy materials and precision components.It works efficiently and quietly on equipment such as 5/8" shaft end milling machines.The power feed was designed with manual knobs, automatic buttons and feed reserving handles for easy operation.This mill power feed adopts Gleason Spiral Bevel Gear, high transmission efficiency, stable transmission ratio and low noise.This table milling machine power feed fits almost any vertical knee type mill, rocker milling machines, drilling and boring machine, and small grinders.