Carplay Android Auto OEM Hub Retrofit Kit for Mazda Carplay Adapter Compatible with Mazda 2/3/6/CX3/CX5/CX9/MX5 2014-2021

About this itemUpgrade your Mazdaoriginal screen with Carplay and Android AutoFunction, which allows you to access map navigation, phone contacts, email, notifications, music and get help from intelligent voice assistant(Siri or Google Assistant).Plug and play. Perfect work with Mazda original system. Replaces Part Number: TK78-66-9U0C K1414 00008FZ34. Compatible with Mazda Connect System, Such as CX-5 2013-2016; CX-9 2016-2020; CX-3 2014-2020; Mazda 2 2014-2020；Mazda 3 2013-2018；Mazda 6 2015-2020；MX-5 2015-2020. (Please feel free to ask if your car is compatible)Works with all original screen function and key function. Our USB adaptor supports original car knob controls andoriginal steering wheel button controls.It provides a safer and easy experience for drivers. Reminder: Please confirm the software version of your car firmware system must be V70.00.21 or later before installation, if not, please upgrade the firmware first. (If you are using an older version of the CMU firmware, the CarPlay/Android Auto compatible USB hub may not be recognized. The SD card needs to be removed before upgrading the firmware, and then inserted after the upgrade is complete, otherwise GPS or navigation will not work properly.)Warm Tips1.The software version of your car firmware system must be V70.00.21 or later2.How to check your car firmware version?Click the button “Setting”-“System”-“About”- “Version Information”- “OS Version”3.How to upgrade your car firmware system?Please refer to the upgrade method in the manual book.4.To prevent noise , wrap the disconnected vehicle wiring harness connector with a piece of sponge tape( 100 x 30 mm).5.The diagram shows the case when there is a single vehicle wiring harness connector.6.If there are two vehicle wiring harness connectors , carry out the same procedure for both connectors.