【With Free PPR CUTTER+Iron Case】800W ​1000W Big-Tree PPR FUSION MACHINE 20MM-63MM Plastic Pipes Welding Machine Kit Heating Tool Heads Set For PPR PB PE Plastic Tube PPR On Sale Special tools for hydropower engineering

Product details of Mini Plastic Pipes Welding Machine with Non-slip Handle 20-32-63mm Automatic Heating Tool Heads Set Fit for PPR PB PE Plastic Tubes with Pipe Cutter*For welding plastic tube such as PP / PPR / PB / PE / PP-C tube and etc.*Designed for long time use.*Non-slip handle, comfortable to grab.*Suitable for tubeline construction equipment.*Manganese steel panel, fast heat conduction.*Thick gold paint touch head, hot melting fast heating.*Install the heatsink on the fixed welding device, place the welding device on the rack, install the corresponding heating die according to the required tube specifications, and use the spanner to tighten, usually small in the front end in the back.*Power on: power on (pay attention to the power must be with a ground protection line), the green indicator light, until the green light is off, the red light is on, indicating that the fuse into the automatic temperature control state, you can start operation. Note: In the automatic temperature control state, red light, green light will be alternately lit, indicating that the fuse is in a controlled state, does not affect the operation.*Welded tube: tube cutter with a straight cut off the tube, the tube and tube at the same time without rotating into the fuse die, and in accordance with the requirements of the table to operate, to the heating time immediately after the tube and tube removed from the die at the same time , Quickly and without rotation directly into the required depth of uniform, so that the joints open into uniform flange