YCS Desoldering Wire Desoldering Braid Welding Solder Remover Wick Wire Suction Tin Welding wick

MECHANIC R300 Desoldering Braid 1.0/1.5/2.0/2.5/3.0/3.5/4.0mm Width 1.5m Length Copper Wick Wire Solder Remover BGA Repair ToolsModel：Mechanic R300Material：CopperWidth：1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / 4.0 mmLength：1.5mHigh efficiency and save the electric repairing time.Avoid the high temperature destruction of electric pad and increase the speed of cleaning the PCB pad.Design in precision,guarantee the max surface tension and the ability of absorbing tin.Speed up the speed of absorbing tin and reduce the residue of flux.Oxidation resistivity and anti-corrosion protection,good thermal conductivity.How to use the "Tin Absorption Belt"?When removing the soldering spot solder, firstly dip the front of thesoldering strip with rosin, and then place the soldering strip on thesolder joint that needs to be unsoldered, and then place the electriciron on the soldering strip.The solder joints are heated, so that when the solder is melted, it will besucked away by the tin absorption belt, and the purpose of desolderingis achieved.If the solder is not completely sucked off at one time, it can be suckedrepeatedly many times until the components can be removed.After de-soldering, cut off the tin strip that has absorbed the solder to prepare for the next use.Care should be taken to avoid scalding yourself with the heated suction tape when using the suction tape.