Super Transparent Waterproof Sealant Glue repair Bubong Cement Wall Tile Plywood Roof Cracks Concrete Watertight Waterproof Paint Without Leakage

   Key Features  • Function:It is primarily used as a waterproofing agent and a crack repair sealant for areas such as roofs, walls, tiles, cement, and bathrooms.Application Surfaces: Suitable for a variety of construction materials, including concrete, ceramic tile, stone, wood, and metal. • Properties:The glue is waterproof, mold proof, and anti-fouling. It provides a tough yet flexible protective layer. • Usage:It is recommended to clean and dry the surface before application. For best results, multiple thin layers should be applied, allowing each layer to dry before the next. The fully dried glue should not be exposed to water until completely cured, which can take up to 24-48 hours depending on conditions.  Construction Process  I. Substrate Preparation  • Cleaning:Remove all loose/flaking old paint, rust scale, heavy corrosion buildup, oils, and dirt from the surface. Ensure the substrate remains dry. • Leveling:Repair uneven surfaces with cement mortar or hydraulic cement-based leak-stopper. • Sealing:Apply penetrating sealer/primer to friable/dusting substrates.  II. Application  • Apply first thin coat.Allow 4-hour drying until touch-dry. Apply second coat. (Following the principle of thin and multiple layers", it improves the service life of the waterproof layer.) • Crack Repairing: Samm cracks: Apply first thin coat. Embed polyester fabric reinforcement while wet, and then apply a second coat to cover it.>2mm cracks: Pre-fill with rapid-setting cementitious mortar, Proceed with standard coating system  Precautions 1. Mix the material thoroughly before application to prevent component sedimentation.2. Application conditions: Maintain ambient temperature between 10°C (50°F and 35°C (95°F) with relative humidity below 85%.