3IN1 Epoxy Floor Paint Cement Wear-Resistant Waterproof FREE paint brush and gloves 1kg (4 to 6 sqm)

Type: 3-in-1 Water-Based Epoxy Floor Paint (combines primer, base coat, and topcoat).Code: DP05 (a multi-functional texture coat that provides a smooth finish).Unit: 1KGColor: Blue, Beige White, Beige Yellow, Grey, Green Key Features:- Waterproof and sun-proof.- Wear-resistant and pressure-resistant.- Odorless, healthy, and environmentally friendly.- Easy to clean and maintain.- Suitable for both indoor and outdoor use.- Direct application possible without a separate primer or varnish. Application Areas:- solid cement- floors- walls Construction ProcessI. Substrate Preparation• Cleaning: Ensure the substrate is clean, dry, and free of oil, grease, dust, dirt, and ponding water.• Repairing: Fill all cracks, pits, and surface defects to achieve a smooth, level substrate.• Surface Grinding: This creates a texture for optimal paint adhesion.• New Concrete Floors: Allow new concrete to cure completely before application (minimum 10 days under summer conditions, 20 days under winter conditions). II. ApplicationPrimer : Apply primer evenly across the prepared surface. Allow primer to dry for a minimum of 2-4 hours before proceeding.DP05 All-In-One Water-Based Floor Coating: Thoroughly mix and apply first coat thinly and evenly with a roller. Allow 4 hours drying time (until touch-dry). Apply second coat thinly and evenly. •Keep the surface dry and avoid any water contact for 7 days after application.• Protect from heavy traffic, equipment, or concentrated loads for 7 days to allow the material to cure fully Precautions:1. Mix the material thoroughly before application to prevent component sedimentation.2. Application conditions: Maintain ambient temperature between 10°C (50°F) and 35°C (95°F) with relative humidity below 85%.