EMJ Timeless Water Based Rubbing Compound Buffing Headlight Renewal car polish & Scratch Repair

𝐓𝐢𝐦𝐞𝐥𝐞𝐬𝐬 𝐖𝐚𝐭𝐞𝐫-𝐁𝐚𝐬𝐞𝐝 𝐑𝐮𝐛𝐛𝐢𝐧𝐠 𝐂𝐨𝐦𝐩𝐨𝐮𝐧𝐝● Easy to use and extremely versatile.● Removes medium to heavy scratches, oxidation and weathering. ● Diminishing abrasives round to help polish away scratches and swirls. ● Removes defects from your car, motorcycle or boat’s finish. ● Creates a smooth, flat and even finish with incredible gloss and shine. ● Advanced formula makes compounding ultra-high solids clear faster and much easier. ● Aggressive enough to remove 1200-grit (or 1500P-grit) sand scratches from soft and cured paint● Help polish away some of the compounding scratches and swirls that other compounds leave behind.𝗛𝗲𝗮𝗱𝗹𝗶𝗴𝗵𝘁 𝗥𝗲𝘀𝘁𝗼𝗿𝗮𝘁𝗶𝗼𝗻STEP BY STEP GUIDE1. Wash of the headlight lenses with car soap and water. Wash the surrounding areas as well.2. Use 𝑴𝑻𝑿 𝑷𝒂𝒊𝒏𝒕𝒆𝒓'𝒔 𝑻𝒂𝒑𝒆 to completely block off the headlight and protect the rest of the car.3. Start with the Hippo Sandpaper Grit 1500.Wet the sandpaper and the headlight, then sand the lens in straight, horizontal strokes. Repeat the process with the Hippo Sandpaper Grit 2000. Then, Hippo Sandpaper Grit 3000.4. Wipe off and dry your headlights, then squeeze some of Timeless Rubbing Compound out onto a clean microfiber towel. Rub in for a few minutes using circular motions. 5. Wax the lens with Timeless Liquid WaxRemoving Scratches Light/MediumSTEP BY STEP GUIDE1. Clean the Surface of the ScratchFOR MEDIUM SCRATCHES - Start with the Hippo Sandpaper Grit 1500. Wet the sandpaper and the area, then sand in straight, horizontal strokes. Repeat the process with the Hippo Sandpaper Grit 2000. Then, Hippo Sandpaper Grit 3000.2. Apply enough Timeless Rubbing Compound over your microfiber towel to cover the dull area with a thin amount of compound. 3. Rub in a circular motion over the dull area with a microfiber towel. 4. Apply more Timeless Rubbing Compound until the area is no longer dull.5. Wax the area with Timeless Liquid Wax.𝐎𝐯𝐞𝐫𝐚𝐥𝐥 𝐮𝐬𝐢𝐧𝐠 𝐁𝐮𝐟𝐟𝐢𝐧𝐠 𝐌𝐚𝐜𝐡𝐢𝐧𝐞STEP BY STEP GUIDE1. With soapy water Clean the entire car surface. Then, rinse the surface with plain water.2. Use MTX Painter's Tape on the edges, headlights/Tailight and emblem.3.Start with the Hippo Sandpaper Grit 1500. Wet the sandpaper and the area, then sand in straight, horizontal strokes. Repeat the process with the Hippo Sandpaper Grit 2000. Then, Hippo Sandpaper Grit 3000.4. Apply a thin line of Timeless Rubbing Compound over the dull sanded area directly on the painted surface. ​Set your buffing machine into motion over scratch. 5. After cleaning off any Timeless Rubbing Compound , you can use another wool pad and polish the surface using APC Fine Liquid Polish. 6. OPTIONAL: Wax the whole area with Timeless Liquid Wax.