AODELAN RS-N12 Wired Remote Switch for Select Cameras ZR Z5II Z50II with Nikon 3.5mm Remote Connector Replace Nikon MC-DC3

This shutter release cable can be used for autofocusing, continuous shooting or single image capture, and long exposures. It will autofocus on a half press of the button and trigger the shutter with a full press. Also, users can press the button and slide it forward to lock it for long exposures. Since you can trigger exposures without touching the camera, you will capture sharp, blub-free images. Additionally, the unit does not require batteries, which makes it an extremely useful tool to keep in your studio or gear bag.Features:>> Shooting Mode: Single Shooting, Continous Shooting, Long Exposure Shooting;>> Prevent vibration during long exposures, close-ups or continuous shooting;>> Shutter release button lock : A shutter release button lock is available which for long exposures shooting and continuous shooting>> No battery requiredHow to use:1. Press the shutter release button halfway to activate the camera's autofocus. (The camera needs to be set to autofocus.)2. Press the shutter release button fully to take a picture.3. Press shutter release button fully and slide the button lock in the direction of arrow to lock the shutter release button for long exposure shooting (the camera's shutter needs to be set to Bulb) or continuous shooting (the camera needs to be set to continuous shooting).4. To release the lock, slide the button lock in the opposite direction.How to install1. To prevent unexpected accidents, please turn off the camera.2. Open the jack over of the camera, align the plug jack with the camera. Insert it safety to ensure good contact.3. You can turn on your camera and start your wonderful shot.Specification:Size:approx. 98x28x20mm (cable excluded)Cable lengh: 1mCompatibility：For Nikon Z5 II and Z50 IINote： For more camera models, please consult online customer service. thanks.