1:1 Ratio Fast Curing Epoxy Resin Crystal Clear Kit for Art Jewelry Crafts Coating Clear Cast Resin with hardener Solid Clear Casting

Description:⭐High transparency⭐Self-leveling⭐Easy to use⭐Strong and durable⭐Wide range of applicationsProduct Info:️Product Name：Epoxy Resin Set️Product Ingredients：Epoxy Resin️Size: 50ml/100mlScope Of Application:This epoxy resin set can be used for a variety of projects, including:* Tabletops and countertops* Artwork and sculptures* Jewelry making* Art projects* Woodworking* Mold making* Coating* RepairingHow to useEpoxy resin is a two-component system consisting of resin and hardener. When mixed together, they form a hard, solid plastic material. Here are the steps you need to follow to use epoxy resin correctly:1. Safety First:Always wear appropriate safety gear when working with epoxy resin. This includes gloves, goggles, and a respirator if necessary. Work in a well-ventilated area and avoid skin contact.2. Prepare Your Work Area:Cover your work area with a plastic sheet or newspaper to protect it from spills. Have all your tools and materials ready before you start.3. Measure Properly:Epoxy resin and hardener must be mixed in the correct ratio, which is usually 1:1, but it can vary depending on the product. Always read and follow the manufacturer's instructions.4. Mix Thoroughly:Mix the resin and hardener together thoroughly for a few minutes until they are fully combined. Make sure to scrape the sides and bottom of your mixing container to ensure everything is incorporated, ensuring no streaks remain.5. Pour Slowly:Pour the mixed epoxy resin slowly onto your project. This will help to avoid air bubbles.6. Remove Air Bubbles:After pouring, you might notice air bubbles in the resin. You can remove these by gently going over the surface with a heat gun or torch.7. Let it Cure:Allow the epoxy to cure for at least 12-24 hours at room temperature (70-80°F / 21-27°C)before moving or touching it. Full hardness is typically achieved after 24 hours . The curing time can vary depending on the product and the environmental conditions.Yellowing:- Store epoxy resin in a cool, dark place to prevent premature yellowing.- Avoid direct sunlight exposure during the curing process to prevent yellowing.- If yellowing has already occurred, you may need to remove the cured layer and reapply a new layer of epoxy resin.Improve curing:- Ensure the correct resin-to-hardener ratio is used, as recommended by the manufacturer.- Mix the resin and hardener thoroughly, but avoid introducing excessive air bubbles.- Avoid using epoxy resin in high humidity conditions, as it may affect curing.Remove bubbles:- After pouring the epoxy resin, use a heat gun or propane torch to gently apply heat over the surface, which will help release trapped air bubbles.- Pop any remaining visible bubbles using a pin or toothpick.- Ensure your working surface is level to avoid uneven distribution of bubbles.