AUTOOL Car Power Inverter Programming Power Supply & Charger & Starter 400A Auto Battery Repair Real-time Car Egulator Vehicle Tool 110V 220V Portable Power Supply Jump Starter Power Bank 3 in 1 InVerter Programming Battery Charger EM385

AUTOOL EM385 Programming Power Supply & Charger & Starter 400A Auto Battery Repair Real-time Car egulator Vehicle Tool

AUTOOL EM385 is a high-quality professional Programming Power Supply with high performance. It is a must-have practical tool used by workshops, car electricians, car dealerships to provide a stable power supply for vehicles during ECU programming with functions such as recovering and fast charging the batteries as well. By switching modes it is also used as a charger and jump-start 12V car batteries or as a power supply for car service and debugging.EM385 has added a vehicle display mode. Uninterruptible power supply, automatically restarts during power outages, rovide stable power support throughout the entire vehicle demonstration process, During the exhibition hall and battery replacement period.

Note: Before powering on, please ensure the voltage is normal, the socket is suitable, and the battery is visually intact. Depending on the required function, please operate correctly and select the appropriate working mode.

Programming Power Mode: When system programming or decoding is required for the vehicle's ECU, provide a stable voltage source to the vehicle. At this time, ensure the battery is fully charged to avoid voltage instability caused by charging. This function allows adjustment of the programming voltage as needed, with a voltage range from 9.0V to 16.0V. Please operate correctly and adjust to the appropriate voltage.

Fast Charging Mode: Under normal conditions, select the battery charging mode for charging the battery. The battery type must be chosen to output different charging voltages and currents.

Battery Repair Mode: For batteries that have been stored for too long or are severely Operation mode description discharged, manual intervention may be equired to enter restoration mode and perform restoration treatment on the battery.

Vehicle Display Mode: The charging voltage can be set within the range of 9.0V to 16.0V. In standby mode, a small current float charge is applied to the battery. During battery discharge detection, the system can output a maximum current of 40A to maintain the battery in a fully charged state. If the set voltage is lower than the battery voltage, the system will automatically set the charging voltage to: battery voltage + 2V.

Forced Start Mode: For batteries that have been stored for a long time and have insufficient battery level, making it impossible to start the vehicle and causing severe discharge or damage to the battery, this mode can be selected. In Forced Start Mode, the device can provide a maximum current of 400A to 450A to directly support the instantaneous current required to start the vehicle.AUTOOL EM385 Programming Power Supply Parameters：

Rated Input Voltage: 110V ±25%, 220V ±25% Input Frequency: 50Hz / 60Hz Lead-Acid Battery Charging Current/Voltage: 40A/12V Lithium Battery Charging Current/Voltage: 20A/12VPacking List：

1* AUTOOL EM385 Programming Power Supply Main unit

1 set of power cable

1* user manual

1* package box