10T/5T hydraulic tension rod hydraulic cylinder automobile maintenance tool

10T/5T hydraulic tension rod hydraulic cylinder automobile maintenance tool Product Specifications:♥ Product name: 5T Tensioner.Weight: 5.5KG.Closing height :53.7CM.Includes two 2-inch eye hooks.Plunger diameter: 33CM.External dimension: cylinder diameter 5.6CM.Piston rod stroke: 13.0CM.Load capacity: 5T.Height after extension :66.7CM.Material: Steel.♥ Product name: 10T Tensioner.Weight: 8.5KG.Closing height :58.5CM.Includes two 2-inch eye hooks.Type: Cylinder outer diameter 6.8cm.Plunger diameter: 33CM.Piston rod stroke: 13.0CM.Load capacity: 10T.Height after extension :71.5CM.Material: Steel. Operation method:1. Use the column or hydraulic lift to lift the car to a certain height.2. Push the hydraulic lift under the vehicle, lift the hydraulic lift to the appropriate position, remove and place the items that need to be repaired (such as transmission, engine, transmission shaft, front and rear axle, etc.) in the center of the support, and then fix the items with a steel chain, open the pressure relief valve, and place the support and items at the bottom position3. Push the hydraulic lift to the required position, and use the crane to lift the object down for maintenance. After the object is repaired, the object is lifted and placed in the center of the support with the crane, the object is fixed with the steel chain, and the hydraulic lift is pushed to the appropriate position under the car.4. Close the pressure relief valve, step on the oil pump, lift the object to the appropriate position, and install the object. If the object is in the wrong position, you can either move the hydraulic conveyor or adjust it by adjusting the handwheel under the bracket. Precautions:♥♥♥ is prohibited with overload.♥♥♥ Use steel bands to secure the object before moving.♥♥♥ The ground will be firm and flat, with no bumps and obstacles allowed to avoid damaging the wheels and turning the whole machine over.