Circuitrocks Desoldering Wick for Solder Electronics 0.8mm Wide and 1.5m Long

Circuitrocks. Solder wick is composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not supposed to be the jumper to the wick. Hence, solder wick is sometimes called desolder braid. Yes, you really can solder anything, and solder wick is a large part of the process. This wick is. 8mm wide and 1.5m long. Desoldering wick for removing solder from printed circuit boards. Usage: 1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick, the solder will be absorbed. 2. Remove the desoldering wick after the solder has been absorbed. 3. Cut off the used section of the wick using nippers. 4. Repeat above steps if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63 and 60 tin content have good absorbability. Desoldering Wick x1