200 miles ultra high definition TV with amplifier Ground wave HD digital TV antenna secondary amplifier high gain wireless ground wave receiver 5 meters

Product Details【Product Usage Guide】1️⃣ Signal Coverage ConfirmationThis product must be used with the local terrestrial digital TV signal in the Philippines. Please confirm that your area has government-authorized signal coverage before purchasing (policies vary from place to place).2️⃣ Channel Quantity DescriptionThe actual number of channels received depends on the number of programs broadcast by the TV station in your area, which may vary in different cities/regions.3️⃣ Device Compatibility✔️ Digital TV: Supported✔️ Old TV: Additional digital set-top box is required (not included in this product)4️⃣ Signal Enhancement SolutionIf the signal is unstable, it is recommended to use it with a signal amplifier, which can significantly improve the smoothness of the picture and increase the number of received channels.5️⃣ Safety Power Supply Tips⚠️ This amplifier adopts a 5V low-voltage design and does not support the use of high-voltage chargers! There is a USB charging power port on the TV/set-top box.Description:Item type: 200-mile AntennaWorking frequency: VHF (172-240MHz) / UHF (470-860MHz)Connector: F maleType: DVB-T2 AntennaReceived signal: ATSC, DVB-T, DVB-T2, ISDBSignal range: 200 milesMaterial: MetalDimension: 2.44 x 5.12 inch (62 x 130mm)Current consumption: 20mAImpedance: 75ΩCompatibility: 720p, 1080i, 1080p / ATSCStorage temperature: -45-85 ℃Cable length: approx. 4.5 meters / 14.77ftWorking temperature: -45-85 ℃Net Weight: 7.6 oz (216g)LNA high gain: 25dBiVoltage: 5 vHow to use:Step 1: Connect the end (f-male) of attached coaxial cable to the ANT / IN connector on the back of the TV or DVB-T tuner.Step 2: In the TV's setup menu, set the tuner mode to "Antenna" or "Air". for more detailed instructions, please consult your TV manual.Step 3: In the TV's setup menu, set TV to "scan" for channels. This can sometimes be referred to as auto program, auto scan, channel search or channel scan. Consult the TV manual for detailed instructions.Step 4: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal position is found.Step 5: fix the antenna at the optimal position you found.