Medical Oxygen Regulator (Shine)

Medical Regulator InstructionMedical regulator is used for oxygen breathing in hospital.1、Mainly component name(Please see overleaf)2.Mainly function:①Oxygen fowrange:1-10L/Min 1-15L/Min2)Pressure reducing range:2.0~3.0kg③ Relief valve Pressure range: (3.5kg ± 0.5kg)④（DF-2 blind Nut）G5/8 G7/8 CGA5403、Appliance introduetion:① Before using.please fill pour clear water into moisture bottle about one thirdreaching water line site.② DF-2 blind nut straw into bolt head, make the pipe of flow meter squsrewater line.③ Pur off regalafor(9), put on oxygen tube switch,so you will the data fromneedle position of pressure gauge(2), At last, straw flow on/off at anti-clockwise according to patients need,adjust switeh.④ If patient need oxygen for a long time, can nse nose pipe to help patientabsorb oxygen.⑤Moisture bottle(20) circles at clockwise,adjust(17) oxygen hole to other site4、 Attention point① Before using the suction,you will check all parts bad or good and clean itby drying cloth.② Pressure gauge(2), regulator(3)no oil, otherwise explode.③Clearwater in moisture bottle keeps clean.④There is adjustable nut(6)in the front of plunder shall be straw at clockwise.⑤ Relief value(7)(15) keeps out of danger.⑥Oxygen dosage is decided by doctor.⑦After using suction,put off the oxygen tube switch,make rest oxygen out.pressure gage to zero site,last put off flow switch if using again, first puton the oxygen tube switch,avoid exploding.⑧The product must be examined periodical, at least once every 6 month.5、 If you don't understand, plese contact to us.