BUILDMATE MPT Metal Cutting Wheel Ø355 x 3 x 25.4mm MJ01001-3553D Black Double Net

Product Overview

The BUILDMATE MPT Metal Cutting Wheel Ø355 x 3 x 25.4mm MJ01001-3553D Black Double Net is a top-of-the-line cutting wheel designed for heavy-duty applications. This cutting wheel features a large diameter (355mm / 14") and a thin kerf (3mm), making it ideal for cutting through thick metal stock, such as steel beams, pipes, and rebar, in a single pass. The wheel is made of high-quality alumina material, which makes it suitable for cutting precious metals like stainless steel.

Key Specifications

• Diameter: Ø355 x 3 x 25.4mm (Ø14 x 1/8 x 1")
• Max. Speed: 80m/s
• Max. RPM: 4400
• Material: Alumina
• Finish: Black Double Net
• ISO Certificate Registration: 9001-2015

Features & Benefits

• High-quality alumina material
• Suitable for cutting precious metals like stainless steel
• Film shrinked packed
• Large diameter (355mm / 14")
• Thin kerf (3mm)
• Cuts through thick metal stock in a single pass
• Ideal for high-volume cutting in fabrication shops, construction, and demolition

Installation & Usage

How to Install the Metal Cutting Wheel

1. Ensure that the grinding machine is properly grounded and the power supply is disconnected before installation.
2. Remove any existing cutting wheel from the machine spindle.
3. Carefully align the new BUILDMATE MPT Metal Cutting Wheel with the spindle.
4. Secure the wheel onto the spindle using the appropriate clamping mechanism.
5. Reconnect the power supply and turn on the machine to check if the wheel is properly installed and rotating smoothly.

How to Use the Metal Cutting Wheel

1. Wear appropriate safety gear, such as gloves, safety glasses, and ear protection.
2. Set the machine to the desired speed and adjust the cutting angle as needed.
3. Place the metal stock to be cut on the machine table.
4. Slowly lower the cutting wheel onto the metal stock, applying steady pressure.
5. Continue cutting until the desired length is achieved.

Maintenance & Care

Tips for Maintaining the Metal Cutting Wheel

• Store the cutting wheel in a dry, cool place away from direct sunlight and moisture.
• Clean the wheel regularly to remove any debris or contaminants that may affect its performance.
• Inspect the wheel before each use to ensure there are no cracks, chips, or other signs of damage.
• Replace the wheel if it shows any signs of wear or damage.

Storage & Handling Recommendations

• Store the cutting wheel in its original packaging to protect it from damage during transportation.
• Handle the wheel carefully to avoid dropping or bumping it.
• Do not expose the wheel to extreme temperatures or humidity levels.

This article provides a comprehensive overview of the BUILDMATE MPT Metal Cutting Wheel Ø355 x 3 x 25.4mm MJ01001-3553D Black Double Net, including its specifications, features, installation and usage instructions, and maintenance tips. By following these guidelines, users can ensure optimal performance and longevity of their cutting wheel.