Manox Model for Naughty Dragon Applicable Metal Gear Metal Umbrella Teeth Metal Bridge Tooth

Metal Bridge teeth for naughty Dragon

plastic umbrella teeth replacement parts, it is recommended to replace the small umbrella teeth with bearings, our shop has 362 bearings.

Large umbrella tooth inner hole 3mm

small umbrella tooth outer diameter 3mm

new and old version Neutral, new version small umbrella tooth is Long points, same use

installation tips:

if the original plastic gear is directly replaced with this gear, we recommend that you change it with strong hands-on ability and complete tools, because if the original plastic gear is modified, you need to take off the original hub adapter, then the gear is taken down, and then the place where the machine screws on the big gear need to be polished into D Port to fix the gear easily. The gear installation position is better than the good position on the axle housing before you start, when the combination is installed back, it is best to apply glue on both sides of the shaft and the pressed Splines. I usually use AB glue, and then knock the combination back. Be sure to knock it in place, be sure!

Finally, remove the excess glue, so that it can be combined and not so easy to slip

statement! This accessory and installation tips are only applicable to naughty Dragon series models, and others are optimistic about the size!

Template protection code 20190712